Allow JavaScript to use JIT on these sites

What it does

Allows you to set a list of site URL patterns that specify sites that are allowed to run JavaScript with JIT (Just In Time) compiler enabled. For detailed information on valid site URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. JavaScript JIT policy exceptions will only be enforced at a site granularity (eTLD+1). A policy set for only subdomain.contoso.com won't correctly apply to contoso.com or subdomain.contoso.com since they both resolve to the same eTLD+1 (contoso.com) for which there's no policy. In this case, policy must be set on contoso.com to apply correctly for both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and not based on top-level origin URL alone; so, for example, if contoso.com is listed in the JavaScriptJitAllowedForSites policy but contoso.com loads a frame containing fabrikam.com then contoso.com will have JavaScript JIT enabled, but fabrikam.com will use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default to JavaScript JIT enabled. If you don't configure this policy for a site then the policy from 'DefaultJavaScriptJitSetting' applies to the site, if set, otherwise Javascript JIT is enabled for the site. Example value: [*.]example.edu

What it writes

Hive

HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER

Registry key

Software\Policies\Microsoft\Edge

Options

Configure and deploy

Choose a state and the option values; the output below is generated from the template for exactly that.

Windows Registry Editor Version 5.00

[-HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites]

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Allow JavaScript to use JIT on these sites
# Name: JavaScriptJitAllowedForSites
# Scope: Machine
# State: Enabled
# Source: msedge.admx

Clear-RegistryKeyValues -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites'

./Device/Vendor/MSFT/Policy/Config/ADMX_msedge/JavaScriptJitAllowedForSites

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' {
            $actualBits = if ($actual -is [uint64]) { $actual } else { [BitConverter]::ToUInt64([BitConverter]::GetBytes([int64]$actual), 0) }
            $expectedBits = if ($Expected -is [uint64]) { $Expected } else { [BitConverter]::ToUInt64([BitConverter]::GetBytes([int64]$Expected), 0) }
            return $actualBits -eq $expectedBits
        }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Allow JavaScript to use JIT on these sites
# Name: JavaScriptJitAllowedForSites
# Scope: Machine
# State: Enabled
# Source: msedge.admx

$keyPath = 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites'
if (Test-Path -LiteralPath $keyPath) {
    $propertyNames = (Get-Item -LiteralPath $keyPath).Property
    if ($propertyNames.Count -gt 0) {
        $reasons.Add('Key should be empty: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites') | Out-Null
    }
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Allow JavaScript to use JIT on these sites
# Name: JavaScriptJitAllowedForSites
# Scope: Machine
# State: Enabled
# Source: msedge.admx

Clear-RegistryKeyValues -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites'

History 47 retained releases

1. 157.0.4341.425 Nov 2026
   Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
   • Description … information on valid site URL patter…[removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For exa…] only [added: for subdomain.contoso.com applies to subdomain.contoso…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use…]…
     Whole description, marked

     Allows you to set a list of site URL patterns that specify sites that are allowed to run JavaScript with JIT (Just In Time) compiler enabled. For detailed information on valid site URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default] to [removed: contoso.com][added: the profile's JavaScript JIT setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 155 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the [removed: JavaScriptJitAllowedForSites policy][added: 'JavaScriptJitAllowedForSites' (Allow JavaScript to use JIT on these sites) policy,] but contoso.com loads a frame [removed: containing fabrikam.com then][added: that contains fabrikam.com,] contoso.com [removed: will have ][added: has ]JavaScript JIT [removed: enabled, but][added: enabled. However,] fabrikam.com [removed: will use ][added: uses ]the policy from [removed: 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), ][added: 'DefaultJavaScriptJitSetting', ]if set, or [removed: default][added: defaults] to JavaScript JIT enabled.[added: Blocklist entries have higher priority than allowlist entries, and allowlist entries have higher priority than the configured default value.] If you don't configure this policy for a [removed: site then ][added: site, ]the policy from 'DefaultJavaScriptJitSetting' applies to the site, if [removed: set, otherwise Javascript][added: set. Otherwise, JavaScript] JIT is enabled for the site. Example value: [*.]example.edu

2. 150.0.4078.8016 Jul 2026
   • Already present in the first release ChangeIntel keeps.

45 later releases left it unchanged.

Template

Internal name

JavaScriptJitAllowedForSites

Namespace

Microsoft.Policies.Edge

Template file

msedge.admx

Release

Microsoft Edge 156.0.4314.80 · file set 76649ce29a47f619…

<policy class="Both" displayName="$(string.JavaScriptJitAllowedForSites)" explainText="$(string.JavaScriptJitAllowedForSites_Explain)" key="Software\Policies\Microsoft\Edge" name="JavaScriptJitAllowedForSites" presentation="$(presentation.JavaScriptJitAllowedForSites)" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Edge:ContentSettings" />
      <supportedOn ref="Microsoft.Policies.Edge:SUPPORTED_WIN7_V93" />
      <elements>
        <list id="JavaScriptJitAllowedForSitesDesc" key="Software\Policies\Microsoft\Edge\JavaScriptJitAllowedForSites" valuePrefix="" />
      </elements>
    </policy>

<presentation id="JavaScriptJitAllowedForSites" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions"><listBox refId="JavaScriptJitAllowedForSitesDesc">Allow JavaScript to use JIT on these sites</listBox></presentation>

Microsoft.Policies.Edge:category:ContentSettings
<category displayName="$(string.ContentSettings_group)" name="ContentSettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Edge:microsoft_edge" />
    </category>
Microsoft.Policies.Edge:category:microsoft_edge
<category displayName="$(string.microsoft_edge)" name="microsoft_edge" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
Microsoft.Policies.Edge:definition:SUPPORTED_WIN7_V93
<definition displayName="$(string.SUPPORTED_WIN7_V93)" name="SUPPORTED_WIN7_V93" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
Microsoft.Policies.Edge:category:ContentSettings
<category displayName="$(string.ContentSettings_group)" name="ContentSettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Edge:microsoft_edge" />
    </category>
<strings><string id="Microsoft.Policies.Edge:ContentSettings_group">Content settings</string></strings>
Microsoft.Policies.Edge:category:microsoft_edge
<category displayName="$(string.microsoft_edge)" name="microsoft_edge" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="Microsoft.Policies.Edge:microsoft_edge">Microsoft Edge</string></strings>
Microsoft.Policies.Edge:definition:SUPPORTED_WIN7_V93
<definition displayName="$(string.SUPPORTED_WIN7_V93)" name="SUPPORTED_WIN7_V93" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="Microsoft.Policies.Edge:SUPPORTED_WIN7_V93">Microsoft Edge version 93, Windows 7 or later</string></strings>