Automatically configure profile based on Active Directory Primary SMTP address (one-time only)

UserNeeds changes for IntuneL_AutomaticallyConfigureProfileBasedOnActiveOnce

Supported on SUPPORTED_Windows7 (defined in the Windows templates)

5568.1000

What it does

This policy setting controls whether a user can create additional profiles and specify a different SMTP address, after the first profile is automatically created using the user’s Active Directory Primary SMTP address. If you enable this policy setting, the first time a user creates a new profile, the user’s Active Directory Primary SMTP address is used for the profile. The user can only enter a profile name. The wizard used to configure specific profile settings is not shown to the user as the profile is created. After the first profile is created automatically, the user can manually create additional profiles. The wizard used to configure specific profile settings is shown to the user and the user can specify any SMTP address as the profile is created. Note: If you want the user’s Active Directory Primary SMTP address to always be used when creating a new profile, then use the “Automatically configure profile based on Active Directory Primary SMTP address” policy setting instead. If that policy setting is enabled, then it takes precedence over this policy setting. If you disable or don’t configure this policy setting, when a user creates a new profile, the wizard used to configure specific profile settings is shown to the user and the user can specify any SMTP address as the profile is created.

What it writes

Hive: HKEY_CURRENT_USER
Registry key: software\policies\microsoft\office\16.0\outlook\autodiscover
Value name: zeroconfigexchangeonce
When enabled: DWORD 1
When disabled: DWORD 0

Why it needs changes for Intune

Policy references a Windows supportedOn definition.
ADMX-INTUNE-WINDOWS-SUPPORTEDON-REFERENCE

Configure and deploy

Choose a state; the output below is generated from the template for exactly that.

Enabled · User · template defaults

Registry file (.reg)

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\autodiscover]
"zeroconfigexchangeonce"=dword:00000001

PowerShell

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Automatically configure profile based on Active Directory Primary SMTP address (one-time only)
# Name: L_AutomaticallyConfigureProfileBasedOnActiveOnce
# Scope: User
# State: Enabled
# Source: outlk16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\autodiscover' -Name 'zeroconfigexchangeonce' -PropertyType 'DWord' -Value 1

The OMA-URI is an inferred ADMX-backed Policy CSP candidate derived from the source ADMX file name and policy name.
Some Microsoft policies use built-in Policy CSP pages whose area names don't match the ADMX file name, so verify the candidate against Microsoft Learn before deployment.

ADMX profile candidate (OMA-URI)

./User/Vendor/MSFT/Policy/Config/ADMX_outlk16/L_AutomaticallyConfigureProfileBasedOnActiveOnce

ADMX SyncML candidate

<SyncML xmlns="SYNCML:SYNCML1.2">
  <SyncBody>
    <Replace>
      <CmdID>1</CmdID>
      <Item>
        <Meta>
          <Format>chr</Format>
          <Type>text/plain</Type>
        </Meta>
        <Target>
          <LocURI>./User/Vendor/MSFT/Policy/Config/ADMX_outlk16/L_AutomaticallyConfigureProfileBasedOnActiveOnce</LocURI>
        </Target>
        <Data>&lt;enabled/&gt;</Data>
      </Item>
    </Replace>
    <Final/>
  </SyncBody>
</SyncML>

Intune remediation scripts

Detection

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' { return [uint64]$actual -eq [uint64]$Expected }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Automatically configure profile based on Active Directory Primary SMTP address (one-time only)
# Name: L_AutomaticallyConfigureProfileBasedOnActiveOnce
# Scope: User
# State: Enabled
# Source: outlk16.admx

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\autodiscover' -Name 'zeroconfigexchangeonce' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\autodiscover\zeroconfigexchangeonce') | Out-Null
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

Remediation

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Automatically configure profile based on Active Directory Primary SMTP address (one-time only)
# Name: L_AutomaticallyConfigureProfileBasedOnActiveOnce
# Scope: User
# State: Enabled
# Source: outlk16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\autodiscover' -Name 'zeroconfigexchangeonce' -PropertyType 'DWord' -Value 1

History 1 retained release

5568.100010 Aug 2026
- Already present in the first release ChangeIntel keeps.

Template

Internal name: L_AutomaticallyConfigureProfileBasedOnActiveOnce
Namespace: outlk16.Office.Microsoft.Policies.Windows
Template file: outlk16.admx
Release: Microsoft 365 Apps 5568.1000 · file set 8be05d876aae137d…

Definition, editor controls and support

Definition

<policy class="User" displayName="$(string.L_AutomaticallyConfigureProfileBasedOnActiveOnce)" explainText="$(string.L_AutomaticallyConfigureProfileBasedOnActiveOnceExplain)" key="software\policies\microsoft\office\16.0\outlook\autodiscover" name="L_AutomaticallyConfigureProfileBasedOnActiveOnce" valueName="zeroconfigexchangeonce" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_Exchangesettings" />
      <supportedOn ref="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
      <enabledValue>
        <decimal value="1" />
      </enabledValue>
      <disabledValue>
        <decimal value="0" />
      </disabledValue>
    </policy>

Editor controls

Supported platforms and category

outlk16.Office.Microsoft.Policies.Windows:category:L_Exchangesettings
<category displayName="$(string.L_Exchangesettings)" name="L_Exchangesettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_ToolsAccounts" />
    </category>
outlk16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeOutlook
<category displayName="$(string.L_MicrosoftOfficeOutlook)" name="L_MicrosoftOfficeOutlook" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
outlk16.Office.Microsoft.Policies.Windows:category:L_ToolsAccounts
<category displayName="$(string.L_ToolsAccounts)" name="L_ToolsAccounts" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook" />
    </category>
outlk16.Office.Microsoft.Policies.Windows:unresolved:Microsoft.Policies.Windows:SUPPORTED_Windows7
<unresolved reference="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
outlk16.Office.Microsoft.Policies.Windows:category:L_Exchangesettings
<category displayName="$(string.L_Exchangesettings)" name="L_Exchangesettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_ToolsAccounts" />
    </category>
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_Exchangesettings">Exchange</string></strings>
outlk16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeOutlook
<category displayName="$(string.L_MicrosoftOfficeOutlook)" name="L_MicrosoftOfficeOutlook" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook">Microsoft Outlook 2016</string></strings>
outlk16.Office.Microsoft.Policies.Windows:category:L_ToolsAccounts
<category displayName="$(string.L_ToolsAccounts)" name="L_ToolsAccounts" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook" />
    </category>
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_ToolsAccounts">Account Settings</string></strings>