Security setting for macros

UserNeeds changes for IntuneL_SecurityLevelOutlook

Supported on SUPPORTED_Windows7 (defined in the Windows templates)

5568.1000

What it does

This policy setting controls the security level for macros in Outlook. If you enable this policy setting, you can choose from four options for handling macros in Outlook: - Always warn. This option corresponds to the "Notifications for all macros" option in the "Macro Settings" section of the Outlook Trust Center. Outlook disables all macros that are not opened from a trusted location, even if the macros are signed by a trusted publisher. For each disabled macro, Outlook displays a security alert dialog box with information about the macro and its digital signature (if present), and allows users to enable the macro or leave it disabled. - Never warn, disable all. This option corresponds to the "Disable all macros without notification" option in the Trust Center. Outlook disables all macros that are not opened from trusted locations, and does not notify users. - Warning for signed, disable unsigned. This option corresponds to the "Notifications for digitally signed macros, all other macros disabled" option in the Trust Center. Outlook handles macros as follows: --If a macro is digitally signed by a trusted publisher, the macro can run if the user has already trusted the publisher. --If a macro has a valid signature from a publisher that the user has not trusted, the security alert dialog box for the macro lets the user choose whether to enable the macro for the current session, disable the macro for the current session, or to add the publisher to the Trusted Publishers list so that it will run without prompting the user in the future. --If a macro does not have a valid signature, Outlook disables it without prompting the user, unless it is opened from a trusted location. This option is the default configuration in Outlook. - No security check. This option corresponds to the "Enable all macros (not recommended; potentially dangerous code can run)" option in the Trust Center. Outlook runs all macros without prompting users. This configuration makes users' computers vulnerable to potentially malicious code and is not recommended. If you disable or do not configure this policy setting, the behavior is the equivalent of Enabled -- Warning for signed, disable unsigned.

What it writes

Hive: HKEY_CURRENT_USER
Registry key: software\policies\microsoft\office\16.0\outlook\security

Why it needs changes for Intune

Policy references a Windows supportedOn definition.
ADMX-INTUNE-WINDOWS-SUPPORTEDON-REFERENCE

Security baselines

Microsoft's Microsoft 365 Apps for Enterprise 2512 sets this to Enabled, in its GPO “MSFT Microsoft 365 Apps v2512 - User”.

Security Level: Set to “Warn for signed, disable unsigned” (3).

Read from the registry.pol files in the baselines' GPO backups, downloaded from Microsoft's Security Compliance Toolkit. All baselines

Options

Option	Type	Registry value	Allowed values
Security LevelDefault: Always warn	Drop-down list	`level`	Always warn`2` Never warn, disable all`4` Warn for signed, disable unsigned`3` No security check`1`

Configure and deploy

Choose a state and the option values; the output below is generated from the template for exactly that.

Enabled · User · template defaults

Registry file (.reg)

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security]
"level"=dword:00000002

PowerShell

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Security setting for macros
# Name: L_SecurityLevelOutlook
# Scope: User
# State: Enabled
# Source: outlk16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security' -Name 'level' -PropertyType 'DWord' -Value 2

The OMA-URI is an inferred ADMX-backed Policy CSP candidate derived from the source ADMX file name and policy name.
Some Microsoft policies use built-in Policy CSP pages whose area names don't match the ADMX file name, so verify the candidate against Microsoft Learn before deployment.

ADMX profile candidate (OMA-URI)

./User/Vendor/MSFT/Policy/Config/ADMX_outlk16/L_SecurityLevelOutlook

ADMX SyncML candidate

<SyncML xmlns="SYNCML:SYNCML1.2">
  <SyncBody>
    <Replace>
      <CmdID>1</CmdID>
      <Item>
        <Meta>
          <Format>chr</Format>
          <Type>text/plain</Type>
        </Meta>
        <Target>
          <LocURI>./User/Vendor/MSFT/Policy/Config/ADMX_outlk16/L_SecurityLevelOutlook</LocURI>
        </Target>
        <Data>&lt;enabled/&gt;
&lt;data id="L_SecurityLevel" value="2"/&gt;</Data>
      </Item>
    </Replace>
    <Final/>
  </SyncBody>
</SyncML>

Intune remediation scripts

Detection

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' { return [uint64]$actual -eq [uint64]$Expected }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Security setting for macros
# Name: L_SecurityLevelOutlook
# Scope: User
# State: Enabled
# Source: outlk16.admx

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security' -Name 'level' -Kind 'DWord' -Expected 2
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security\level') | Out-Null
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

Remediation

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Security setting for macros
# Name: L_SecurityLevelOutlook
# Scope: User
# State: Enabled
# Source: outlk16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security' -Name 'level' -PropertyType 'DWord' -Value 2

History 1 retained release

5568.100010 Aug 2026
- Already present in the first release ChangeIntel keeps.

Template

Internal name: L_SecurityLevelOutlook
Namespace: outlk16.Office.Microsoft.Policies.Windows
Template file: outlk16.admx
Release: Microsoft 365 Apps 5568.1000 · file set 8be05d876aae137d…

Definition, editor controls and support

Definition

<policy Area="Security Baseline" AreaCategory="Macros" class="User" displayName="$(string.L_SecurityLevelOutlook)" explainText="$(string.L_SecutityLevelOutlookExplain)" key="software\policies\microsoft\office\16.0\outlook\security" name="L_SecurityLevelOutlook" presentation="$(presentation.L_SecurityLevelOutlook)" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_TrustCenter" />
      <supportedOn ref="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
      <elements>
        <enum id="L_SecurityLevel" valueName="level">
          <item displayName="$(string.L_Alwayswarn)">
            <value>
              <decimal value="2" />
            </value>
          </item>
          <item displayName="$(string.L_Neverwarndisableall)">
            <value>
              <decimal value="4" />
            </value>
          </item>
          <item displayName="$(string.L_Warnforsigneddisableunsigned)">
            <value>
              <decimal value="3" />
            </value>
          </item>
          <item displayName="$(string.L_NoSecuritycheck)">
            <value>
              <decimal value="1" />
            </value>
          </item>
        </enum>
      </elements>
    </policy>

Editor controls

<presentation id="L_SecurityLevelOutlook" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <dropdownList defaultItem="0" noSort="true" refId="L_SecurityLevel">Security Level</dropdownList>
      </presentation>

Supported platforms and category

outlk16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeOutlook
<category displayName="$(string.L_MicrosoftOfficeOutlook)" name="L_MicrosoftOfficeOutlook" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
outlk16.Office.Microsoft.Policies.Windows:category:L_Security
<category displayName="$(string.L_Security)" name="L_Security" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook" />
    </category>
outlk16.Office.Microsoft.Policies.Windows:category:L_TrustCenter
<category displayName="$(string.L_TrustCenter)" name="L_TrustCenter" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_Security" />
    </category>
outlk16.Office.Microsoft.Policies.Windows:unresolved:Microsoft.Policies.Windows:SUPPORTED_Windows7
<unresolved reference="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
outlk16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeOutlook
<category displayName="$(string.L_MicrosoftOfficeOutlook)" name="L_MicrosoftOfficeOutlook" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook">Microsoft Outlook 2016</string></strings>
outlk16.Office.Microsoft.Policies.Windows:category:L_Security
<category displayName="$(string.L_Security)" name="L_Security" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeOutlook" />
    </category>
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_Security">Security</string></strings>
outlk16.Office.Microsoft.Policies.Windows:category:L_TrustCenter
<category displayName="$(string.L_TrustCenter)" name="L_TrustCenter" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="outlk16.Office.Microsoft.Policies.Windows:L_Security" />
    </category>
<strings><string id="outlk16.Office.Microsoft.Policies.Windows:L_TrustCenter">Trust Center</string></strings>