Set password rules level

UserNeeds changes for IntuneL_SetPasswordRulesLevel

Supported on SUPPORTED_Windows7 (defined in the Windows templates)

5568.1000

What it does

This policy setting allows you to set the password rules level. If you enable this policy setting, you may specify a password rules level: - No password checks: There are no complexity checks - Local length check: Minimum length checks - Local length and complexity checks: Minimum length checks plus 3 of 4 character groups checks. - Local length, local complexity, and domain policy checks: All the previous checks plus Windows domain password rules enforced. If you select "Local length and complexity checks" or "Local length, local complexity, and domain policy checks," then the password must contain characters from at least three of four character sets: lowercase a-z, uppercase A-Z, digits 0-9, or non-alphabetic characters. When this complexity is enforced, the minimum password length needs to be at least 6, but can be more depending on the value set in the "Set minimum password length" policy setting. If you select "Local length, local complexity, and domain policy checks," then Microsoft Office will use the Windows domain policy as well as all the settings "Local length and complexity checks." This allows a custom password filter that is installed for Windows passwords to be used. If you are offline or a domain controller cannot be contacted, then the Windows password settings are not used, and only the "Local length and complexity checks" settings are used. If you don’t have a custom password filter, then "Local length and complexity checks" saves a trip across the network and would be the best choice. If you disable or do not configure this policy setting, the behavior is the same as if this policy setting were enabled and "No password checks" selected.

What it writes

Hive: HKEY_CURRENT_USER
Registry key: software\policies\microsoft\office\16.0\common\security\passwordcomplexity

Why it needs changes for Intune

Policy references a Windows supportedOn definition.
ADMX-INTUNE-WINDOWS-SUPPORTEDON-REFERENCE

Options

Option	Type	Registry value	Allowed values
L_SetPasswordRulesLevelDropIDDefault: No password checks	Drop-down list	`policylevel`	No password checks`0` Local length check`1` Local length and complexity checks`2` Local length, local complexity, and domain policy checks`3`

Configure and deploy

Choose a state and the option values; the output below is generated from the template for exactly that.

Enabled · User · template defaults

Registry file (.reg)

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\common\security\passwordcomplexity]
"policylevel"=dword:00000000

PowerShell

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Set password rules level
# Name: L_SetPasswordRulesLevel
# Scope: User
# State: Enabled
# Source: office16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\common\security\passwordcomplexity' -Name 'policylevel' -PropertyType 'DWord' -Value 0

The OMA-URI is an inferred ADMX-backed Policy CSP candidate derived from the source ADMX file name and policy name.
Some Microsoft policies use built-in Policy CSP pages whose area names don't match the ADMX file name, so verify the candidate against Microsoft Learn before deployment.

ADMX profile candidate (OMA-URI)

./User/Vendor/MSFT/Policy/Config/ADMX_office16/L_SetPasswordRulesLevel

ADMX SyncML candidate

<SyncML xmlns="SYNCML:SYNCML1.2">
  <SyncBody>
    <Replace>
      <CmdID>1</CmdID>
      <Item>
        <Meta>
          <Format>chr</Format>
          <Type>text/plain</Type>
        </Meta>
        <Target>
          <LocURI>./User/Vendor/MSFT/Policy/Config/ADMX_office16/L_SetPasswordRulesLevel</LocURI>
        </Target>
        <Data>&lt;enabled/&gt;
&lt;data id="L_SetPasswordRulesLevelDropID" value="0"/&gt;</Data>
      </Item>
    </Replace>
    <Final/>
  </SyncBody>
</SyncML>

Intune remediation scripts

Detection

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' { return [uint64]$actual -eq [uint64]$Expected }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Set password rules level
# Name: L_SetPasswordRulesLevel
# Scope: User
# State: Enabled
# Source: office16.admx

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\common\security\passwordcomplexity' -Name 'policylevel' -Kind 'DWord' -Expected 0
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\common\security\passwordcomplexity\policylevel') | Out-Null
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

Remediation

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Set password rules level
# Name: L_SetPasswordRulesLevel
# Scope: User
# State: Enabled
# Source: office16.admx

Set-RegistryValue -Path 'Registry::HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\common\security\passwordcomplexity' -Name 'policylevel' -PropertyType 'DWord' -Value 0

History 1 retained release

5568.100010 Aug 2026
- Already present in the first release ChangeIntel keeps.

Template

Internal name: L_SetPasswordRulesLevel
Namespace: office16.Office.Microsoft.Policies.Windows
Template file: office16.admx
Release: Microsoft 365 Apps 5568.1000 · file set 8be05d876aae137d…

Definition, editor controls and support

Definition

<policy class="User" displayName="$(string.L_SetPasswordRulesLevel)" explainText="$(string.L_SetPasswordRulesLevelExplain)" key="software\policies\microsoft\office\16.0\common\security\passwordcomplexity" name="L_SetPasswordRulesLevel" presentation="$(presentation.L_SetPasswordRulesLevel)" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="office16.Office.Microsoft.Policies.Windows:L_SecuritySettings" />
      <supportedOn ref="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
      <elements>
        <enum id="L_SetPasswordRulesLevelDropID" valueName="policylevel">
          <item displayName="$(string.L_SetPasswordRulesLevelStr1)">
            <value>
              <decimal value="0" />
            </value>
          </item>
          <item displayName="$(string.L_SetPasswordRulesLevelStr2)">
            <value>
              <decimal value="1" />
            </value>
          </item>
          <item displayName="$(string.L_SetPasswordRulesLevelStr3)">
            <value>
              <decimal value="2" />
            </value>
          </item>
          <item displayName="$(string.L_SetPasswordRulesLevelStr4)">
            <value>
              <decimal value="3" />
            </value>
          </item>
        </enum>
      </elements>
    </policy>

Editor controls

<presentation id="L_SetPasswordRulesLevel" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <dropdownList defaultItem="0" noSort="true" refId="L_SetPasswordRulesLevelDropID">
        </dropdownList>
      </presentation>

Supported platforms and category

office16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeSystem
<category displayName="$(string.L_MicrosoftOfficeSystem)" name="L_MicrosoftOfficeSystem" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
office16.Office.Microsoft.Policies.Windows:category:L_SecuritySettings
<category displayName="$(string.L_SecuritySettings)" name="L_SecuritySettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="office16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeSystem" />
    </category>
office16.Office.Microsoft.Policies.Windows:unresolved:Microsoft.Policies.Windows:SUPPORTED_Windows7
<unresolved reference="Microsoft.Policies.Windows:SUPPORTED_Windows7" />
office16.Office.Microsoft.Policies.Windows:category:L_MicrosoftOfficeSystem
<category displayName="$(string.L_MicrosoftOfficeSystem)" name="L_MicrosoftOfficeSystem" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="office16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeSystem">Microsoft Office 2016</string></strings>
office16.Office.Microsoft.Policies.Windows:category:L_SecuritySettings
<category displayName="$(string.L_SecuritySettings)" name="L_SecuritySettings" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="office16.Office.Microsoft.Policies.Windows:L_MicrosoftOfficeSystem" />
    </category>
<strings><string id="office16.Office.Microsoft.Policies.Windows:L_SecuritySettings">Security Settings</string></strings>