Network › Link-Layer Topology Discovery

Turn on Mapper I/O (LLTDIO) driver

ComputerNative Intune settingLLTD_EnableLLTDIO

Supported on At least Windows Vista

25H2 · 1.0

What it does

This policy setting changes the operational behavior of the Mapper I/O network protocol driver. LLTDIO allows a computer to discover the topology of a network it's connected to. It also allows a computer to initiate Quality-of-Service requests such as bandwidth estimation and network health analysis. If you enable this policy setting, additional options are available to fine-tune your selection. You may choose the "Allow operation while in domain" option to allow LLTDIO to operate on a network interface that's connected to a managed network. On the other hand, if a network interface is connected to an unmanaged network, you may choose the "Allow operation while in public network" and "Prohibit operation while in private network" options instead. If you disable or do not configure this policy setting, the default behavior of LLTDIO will apply.

What it writes

Hive: HKEY_LOCAL_MACHINE
Registry key: Software\Policies\Microsoft\Windows\LLTD
Value name: EnableLLTDIO
When enabled: DWORD 1
When disabled: DWORD 0

Why it needs changes for Intune

Policy references a Windows supportedOn definition.
ADMX-INTUNE-WINDOWS-SUPPORTEDON-REFERENCE

In Intune

Native Intune setting: Yes — Policy CSP

./Device/Vendor/MSFT/Policy/Config/ADMX_LinkLayerTopologyDiscovery/LLTD_EnableLLTDIOADMX_LinkLayerTopologyDiscovery on Microsoft LearnADMX-backed: Windows ships this template, so it is set with the template's own values, without an import.Windows builds listed: 10.0.22000, 10.0.19043.1202, 10.0.19042.1202, 10.0.19041.1202.

From Microsoft's Policy CSP DDF files (DDF v2 Files, February 2026), read 18 Oct 2026.

Options

Option	Type	Registry value	Allowed values
Allow operation while in domain	Checkbox	`AllowLLTDIOOnDomain`	On (1) or off (0)
Allow operation while in public network	Checkbox	`AllowLLTDIOOnPublicNet`	On (1) or off (0)
Prohibit operation while in private network	Checkbox	`ProhibitLLTDIOOnPrivateNet`	On (1) or off (0)

Configure and deploy

Choose a state and the option values; the output below is generated from the template for exactly that.

Enabled · Computer · template defaults

Registry file (.reg)

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD]
"AllowLLTDIOOnDomain"=dword:00000001
"AllowLLTDIOOnPublicNet"=dword:00000001
"EnableLLTDIO"=dword:00000001
"ProhibitLLTDIOOnPrivateNet"=dword:00000001

PowerShell

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Turn on Mapper I/O (LLTDIO) driver
# Name: LLTD_EnableLLTDIO
# Scope: Machine
# State: Enabled
# Source: LinkLayerTopologyDiscovery.admx

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'EnableLLTDIO' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnDomain' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnPublicNet' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'ProhibitLLTDIOOnPrivateNet' -PropertyType 'DWord' -Value 1

These deployment candidates come from the ADMX template; they are separate from the native CSP mapping above.

The OMA-URI is an inferred ADMX-backed Policy CSP candidate derived from the source ADMX file name and policy name.
Some Microsoft policies use built-in Policy CSP pages whose area names don't match the ADMX file name, so verify the candidate against Microsoft Learn before deployment.
The generated payload is incomplete because one or more ADMX element values were not supplied: LLTD_EnableLLTDIO_AllowOnDomain, LLTD_EnableLLTDIO_AllowOnPublicNet, LLTD_EnableLLTDIO_ProhibitOnPrivateNet

ADMX profile candidate (OMA-URI)

./Device/Vendor/MSFT/Policy/Config/ADMX_LinkLayerTopologyDiscovery/LLTD_EnableLLTDIO

Intune remediation scripts

Detection

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' { return [uint64]$actual -eq [uint64]$Expected }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Turn on Mapper I/O (LLTDIO) driver
# Name: LLTD_EnableLLTDIO
# Scope: Machine
# State: Enabled
# Source: LinkLayerTopologyDiscovery.admx

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'EnableLLTDIO' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD\EnableLLTDIO') | Out-Null
}

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnDomain' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD\AllowLLTDIOOnDomain') | Out-Null
}

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnPublicNet' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD\AllowLLTDIOOnPublicNet') | Out-Null
}

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'ProhibitLLTDIOOnPrivateNet' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD\ProhibitLLTDIOOnPrivateNet') | Out-Null
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

Remediation

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Turn on Mapper I/O (LLTDIO) driver
# Name: LLTD_EnableLLTDIO
# Scope: Machine
# State: Enabled
# Source: LinkLayerTopologyDiscovery.admx

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'EnableLLTDIO' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnDomain' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'AllowLLTDIOOnPublicNet' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\LLTD' -Name 'ProhibitLLTDIOOnPrivateNet' -PropertyType 'DWord' -Value 1

History 5 retained releases

22H2 · 1.015 Jul 2024
- Already present in the first release ChangeIntel keeps.

4 later releases left it unchanged.

Template

Internal name: LLTD_EnableLLTDIO
Namespace: Microsoft.Policies.LinkLayerTopology
Template file: LinkLayerTopologyDiscovery.admx
Release: Windows 11 25H2 · 1.0 · file set de4e49983ebd651f…

Definition, editor controls and support

Definition

<policy class="Machine" displayName="$(string.LLTD_EnableLLTDIO)" explainText="$(string.LLTD_EnableLLTDIO_Help)" key="Software\Policies\Microsoft\Windows\LLTD" name="LLTD_EnableLLTDIO" presentation="$(presentation.LLTD_EnableLLTDIO)" valueName="EnableLLTDIO" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.LinkLayerTopology:LLTD_Category" />
      <supportedOn ref="Microsoft.Policies.Windows:SUPPORTED_WindowsVista" />
      <enabledValue>
        <decimal value="1" />
      </enabledValue>
      <disabledValue>
        <decimal value="0" />
      </disabledValue>
      <elements>
        <boolean id="LLTD_EnableLLTDIO_AllowOnDomain" valueName="AllowLLTDIOOnDomain">
          <trueValue>
            <decimal value="1" />
          </trueValue>
          <falseValue>
            <decimal value="0" />
          </falseValue>
        </boolean>
        <boolean id="LLTD_EnableLLTDIO_AllowOnPublicNet" valueName="AllowLLTDIOOnPublicNet">
          <trueValue>
            <decimal value="1" />
          </trueValue>
          <falseValue>
            <decimal value="0" />
          </falseValue>
        </boolean>
        <boolean id="LLTD_EnableLLTDIO_ProhibitOnPrivateNet" valueName="ProhibitLLTDIOOnPrivateNet">
          <trueValue>
            <decimal value="1" />
          </trueValue>
          <falseValue>
            <decimal value="0" />
          </falseValue>
        </boolean>
      </elements>
    </policy>

Editor controls

<presentation id="LLTD_EnableLLTDIO" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <checkBox refId="LLTD_EnableLLTDIO_AllowOnDomain">Allow operation while in domain</checkBox>
        <checkBox refId="LLTD_EnableLLTDIO_AllowOnPublicNet">Allow operation while in public network</checkBox>
        <checkBox refId="LLTD_EnableLLTDIO_ProhibitOnPrivateNet">Prohibit operation while in private network</checkBox>
      </presentation>

Supported platforms and category

Microsoft.Policies.LinkLayerTopology:category:LLTD_Category
<category displayName="$(string.LLTD_Category)" explainText="$(string.LLTD_Category_Help)" name="LLTD_Category" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:Network" />
    </category>
Microsoft.Policies.Products:product:MicrosoftWindows
sha256:4b3cb6917b5e5b7cd142c0157f10882786b3e9ee67c29fd7b8f4c6cb2eec5fe7
Microsoft.Policies.Windows:category:Network
<category displayName="$(string.Network)" explainText="$(string.Network_Help)" name="Network" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
Microsoft.Policies.Windows:definition:SUPPORTED_WindowsVista
<definition displayName="$(string.SUPPORTED_WindowsVista)" name="SUPPORTED_WindowsVista" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <or>
          <range minVersionIndex="4" ref="Microsoft.Policies.Products:MicrosoftWindows" />
        </or>
      </definition>
Microsoft.Policies.LinkLayerTopology:category:LLTD_Category
<category displayName="$(string.LLTD_Category)" explainText="$(string.LLTD_Category_Help)" name="LLTD_Category" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:Network" />
    </category>
<strings><string id="Microsoft.Policies.LinkLayerTopology:LLTD_Category">Link-Layer Topology Discovery</string><string id="Microsoft.Policies.LinkLayerTopology:LLTD_Category_Help">Configures all Link-Layer Topology Discovery components.</string></strings>
Microsoft.Policies.Products:product:MicrosoftWindows
<product displayName="$(string.MicrosoftWindows)" name="MicrosoftWindows" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <majorVersion displayName="$(string.MicrosoftWindows2000)" name="MicrosoftWindows2000" versionIndex="1">
          <minorVersion displayName="$(string.MicrosoftWindows2000_RTM)" name="MicrosoftWindows2000_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP1)" name="MicrosoftWindows2000_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP2)" name="MicrosoftWindows2000_SP2" versionIndex="2" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP3)" name="MicrosoftWindows2000_SP3" versionIndex="3" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP4)" name="MicrosoftWindows2000_SP4" versionIndex="4" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsXP)" name="MicrosoftWindowsXP" versionIndex="2">
          <minorVersion displayName="$(string.MicrosoftWindowsXP_RTM)" name="MicrosoftWindowsXP_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsXP_SP1)" name="MicrosoftWindowsXP_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindowsXP_SP2)" name="MicrosoftWindowsXP_SP2" versionIndex="2" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer2003)" name="MicrosoftWindowsServer2003" versionIndex="3">
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_RTM)" name="MicrosoftWindowsServer2003_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_SP1)" name="MicrosoftWindowsServer2003_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_R2)" name="MicrosoftWindowsServer2003_R2" versionIndex="2" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_SP2)" name="MicrosoftWindowsServer2003_SP2" versionIndex="3" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsVista)" name="MicrosoftWindowsVista" versionIndex="4">
          <minorVersion displayName="$(string.MicrosoftWindowsVista_RTM)" name="MicrosoftWindowsVista_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsVista_SP1)" name="MicrosoftWindowsVista_SP1" versionIndex="1" />
        </majorVersion>
        <majorVersion displayName="$(string.WindowsServer2008)" name="WindowsServer2008" versionIndex="5">
          <minorVersion displayName="$(string.WindowsServer2008_RTM)" name="WindowsServer2008_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.WindowsServer2008_R2)" name="WindowsServer2008_R2" versionIndex="1" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows7)" name="MicrosoftWindows7" versionIndex="6">
          <minorVersion displayName="$(string.MicrosoftWindows7_RTM)" name="MicrosoftWindows7_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer8)" name="MicrosoftWindowsServer8" versionIndex="7">
           <minorVersion displayName="$(string.MicrosoftWindowsServer8_RTM)" name="MicrosoftWindowsServer8_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows8)" name="MicrosoftWindows8" versionIndex="8">
          <minorVersion displayName="$(string.MicrosoftWindows8_RTM)" name="MicrosoftWindows8_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_RT)" name="MicrosoftWindows_RT" versionIndex="9">
          <minorVersion displayName="$(string.MicrosoftWindows_RT_RTM)" name="MicrosoftWindows_RT_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer_6_3)" name="MicrosoftWindowsServer_6_3" versionIndex="10">
           <minorVersion displayName="$(string.MicrosoftWindowsServer_6_3_RTM)" name="MicrosoftWindowsServer_6_3_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_6_3)" name="MicrosoftWindows_6_3" versionIndex="11">
          <minorVersion displayName="$(string.MicrosoftWindows_6_3_RTM)" name="MicrosoftWindows_6_3_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_6_3_RT)" name="MicrosoftWindows_6_3_RT" versionIndex="12">
            <minorVersion displayName="$(string.MicrosoftWindows_6_3_RT_RTM)" name="MicrosoftWindows_6_3_RT_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer_10_0)" name="MicrosoftWindowsServer_10_0" versionIndex="13">
            <minorVersion displayName="$(string.MicrosoftWindowsServer_10_0_RTM)" name="MicrosoftWindowsServer_10_0_RTM" versionIndex="0" />
          </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_10_0)" name="MicrosoftWindows_10_0" versionIndex="14">
            <minorVersion displayName="$(string.MicrosoftWindows_10_0_RTM)" name="MicrosoftWindows_10_0_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_10_0_RT)" name="MicrosoftWindows_10_0_RT" versionIndex="15">
            <minorVersion displayName="$(string.MicrosoftWindows_10_0_RT_RTM)" name="MicrosoftWindows_10_0_RT_RTM" versionIndex="0" />
        </majorVersion>
      </product>
<strings><string id="Microsoft.Policies.Products:MicrosoftWindows">Windows operating system</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000">Windows 2000 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_RTM">Windows 2000</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP1">Windows 2000 Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP2">Windows 2000 Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP3">Windows 2000 Service Pack 3</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP4">Windows 2000 Service Pack 4</string><string id="Microsoft.Policies.Products:MicrosoftWindows7">Windows 7 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows7_RTM">Windows 7</string><string id="Microsoft.Policies.Products:MicrosoftWindows8">Windows 8 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows8_RTM">Windows 8</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003">Windows Server 2003 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_R2">Windows Server 2003 R2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_RTM">Windows Server 2003</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_SP1">Windows Server 2003 Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_SP2">Windows Server 2003 Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer8">Windows Server 2012 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer8_RTM">Windows Server 2012</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_10_0">Windows Server 2016 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_10_0_RTM">Windows Server 2016</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_6_3">Windows Server 2012 R2 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_6_3_RTM">Windows Server 2012 R2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista">Windows Vista operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista_RTM">Windows Vista</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista_SP1">Windows Vista Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP">Windows XP operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_RTM">Windows XP</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_SP1">Windows XP Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_SP2">Windows XP Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0">Windows 10 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RT">Windows 10 RT operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RTM">Windows 10</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RT_RTM">Windows 10 RT</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3">Windows 8.1 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RT">Windows RT 8.1 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RTM">Windows 8.1</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RT_RTM">Windows RT 8.1</string><string id="Microsoft.Policies.Products:MicrosoftWindows_RT">Windows RT operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_RT_RTM">Windows RT</string><string id="Microsoft.Policies.Products:WindowsServer2008">Windows Server 2008 operating systems</string><string id="Microsoft.Policies.Products:WindowsServer2008_R2">Windows Server 2008 R2</string><string id="Microsoft.Policies.Products:WindowsServer2008_RTM">Windows Server 2008</string></strings>
Microsoft.Policies.Windows:category:Network
<category displayName="$(string.Network)" explainText="$(string.Network_Help)" name="Network" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="Microsoft.Policies.Windows:Network">Network</string><string id="Microsoft.Policies.Windows:Network_Help">Allows configuration of components of the operating system used by a client computer to connect to a network. This includes DNS settings and Offline Files.</string></strings>
Microsoft.Policies.Windows:definition:SUPPORTED_WindowsVista
<definition displayName="$(string.SUPPORTED_WindowsVista)" name="SUPPORTED_WindowsVista" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <or>
          <range minVersionIndex="4" ref="Microsoft.Policies.Products:MicrosoftWindows" />
        </or>
      </definition>
<strings><string id="Microsoft.Policies.Windows:SUPPORTED_WindowsVista">At least Windows Vista</string></strings>