Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

Snappier · Vulnerability

CVSS 3.1 7.0 HIGHEUVD CVSS 3.1 7.0 CVSS 3.1 · [email protected] · Secondary 7.0 HIGHCVSS 3.1 · [email protected] · Primary 5.9 MEDIUMCVSS_V3 Publisher rating HIGHFixed by Snappier 1.1.1KEV status unknown

cve-program · CVE-2023-28638

Published

Snappier is a high performance C# implementation of the Snappy compression algorithm. This is a buffer overrun vulnerability that can affect any user of Snappier 1.1.0. In this release, much of the code was rewritten to use byte references rather than pointers to pinned buffers. This change generally improves performance and reduces workload on the garbage collector. However, when the garbage collector performs compaction and rearranges memory, it must update any byte references on the stack to refer to the updated location. The .NET garbage collector can only update these byte references if they still point within the buffer or to a point one byte past the end of the buffer. If they point outside this area, the buffer itself may be moved while the byte reference stays the same. There are several places in 1.1.0 where byte references very briefly point outside the valid areas of buffers. These are at locations in the code being used for buffer range checks. While the invalid references are never dereferenced directly, if a GC compaction were to occur during the brief window when they are on the stack then it could invalidate the buffer range check and allow other operations to overrun the buffer. This should be very difficult for an attacker to trigger intentionally. It would require a repetitive bulk attack with the hope that a GC compaction would occur at precisely the right moment during one of the requests. However, one of the range checks with this problem is a check based on input data in the decompression buffer, meaning malformed input data could be used to increase the chance of success. Note that any resulting buffer overrun is likely to cause access to protected memory, which will then cause an exception and the process to be terminated. Therefore, the most likely result of an attack is a denial of service. This issue has been patched in release 1.1.1. Users are advised to upgrade. Users unable to upgrade may pin buffers to a fixed location before using them for compression or decompression to mitigate some, but not all, of these cases. At least one temporary decompression buffer is internal to the library and never pinned.

Read the publisher's advisory

euvd · EUVD-2023-0935

Published

Snappier is a high performance C# implementation of the Snappy compression algorithm. This is a buffer overrun vulnerability that can affect any user of Snappier 1.1.0. In this release, much of the code was rewritten to use byte references rather than pointers to pinned buffers. This change generally improves performance and reduces workload on the garbage collector. However, when the garbage collector performs compaction and rearranges memory, it must update any byte references on the stack to refer to the updated location. The .NET garbage collector can only update these byte references if they still point within the buffer or to a point one byte past the end of the buffer. If they point outside this area, the buffer itself may be moved while the byte reference stays the same. There are several places in 1.1.0 where byte references very briefly point outside the valid areas of buffers. These are at locations in the code being used for buffer range checks. While the invalid references are never dereferenced directly, if a GC compaction were to occur during the brief window when they are on the stack then it could invalidate the buffer range check and allow other operations to overrun the buffer. This should be very difficult for an attacker to trigger intentionally. It would require a repetitive bulk attack with the hope that a GC compaction would occur at precisely the right moment during one of the requests. However, one of the range checks with this problem is a check based on input data in the decompression buffer, meaning malformed input data could be used to increase the chance of success. Note that any resulting buffer overrun is likely to cause access to protected memory, which will then cause an exception and the process to be terminated. Therefore, the most likely result of an attack is a denial of service. This issue has been patched in release 1.1.1. Users are advised to upgrade. Users unable to upgrade may pin buffers to a fixed location before using them for compression or decompression to mitigate some, but not all, of these cases. At least one temporary decompression buffer is internal to the library and never pinned.

Read the publisher's advisory

nvd · CVE-2023-28638

Published

Snappier is a high performance C# implementation of the Snappy compression algorithm. This is a buffer overrun vulnerability that can affect any user of Snappier 1.1.0. In this release, much of the code was rewritten to use byte references rather than pointers to pinned buffers. This change generally improves performance and reduces workload on the garbage collector. However, when the garbage collector performs compaction and rearranges memory, it must update any byte references on the stack to refer to the updated location. The .NET garbage collector can only update these byte references if they still point within the buffer or to a point one byte past the end of the buffer. If they point outside this area, the buffer itself may be moved while the byte reference stays the same. There are several places in 1.1.0 where byte references very briefly point outside the valid areas of buffers. These are at locations in the code being used for buffer range checks. While the invalid references are never dereferenced directly, if a GC compaction were to occur during the brief window when they are on the stack then it could invalidate the buffer range check and allow other operations to overrun the buffer. This should be very difficult for an attacker to trigger intentionally. It would require a repetitive bulk attack with the hope that a GC compaction would occur at precisely the right moment during one of the requests. However, one of the range checks with this problem is a check based on input data in the decompression buffer, meaning malformed input data could be used to increase the chance of success. Note that any resulting buffer overrun is likely to cause access to protected memory, which will then cause an exception and the process to be terminated. Therefore, the most likely result of an attack is a denial of service. This issue has been patched in release 1.1.1. Users are advised to upgrade. Users unable to upgrade may pin buffers to a fixed location before using them for compression or decompression to mitigate some, but not all, of these cases. At least one temporary decompression buffer is internal to the library and never pinned.

Read the publisher's advisory

osv · GHSA-838x-pcvx-6p5w

Published

### Impact This is a buffer overrun vulnerability that can affect any user of Snappier 1.1.0. In this release, much of the code was rewritten to use byte references rather than pointers to pinned buffers. This change generally improves performance and reduces workload on the garbage collector. However, when the garbage collector performs compaction and rearranges memory, it must update any byte references on the stack to refer to the updated location. The .NET garbage collector can only update these byte references if they still point within the buffer or to a point one byte past the end of the buffer. If they point outside this area, the buffer itself may be moved while the byte reference stays the same. There are several places in 1.1.0 where byte references very briefly point outside the valid areas of buffers. These are at locations in the code being used for buffer range checks. While the invalid references are never dereferenced directly, if a GC compaction were to occur during the brief window when they are on the stack then it could invalidate the buffer range check and allow other operations to overrun the buffer. This should be very difficult for an attacker to trigger intentionally. It would require a repetitive bulk attack with the hope that a GC compaction would occur at precisely the right moment during one of the requests. However, one of the range checks with this problem is a check based on input data in the decompression buffer, meaning malformed input data could be used to increase the chance of success. Note that any resulting buffer overrun is likely to cause access to protected memory, which will then cause an exception and the process to be terminated. Therefore, the most likely result of an attack is a denial of service. ### Patches This is patched in release 1.1.1. ### Workarounds Pinning any buffers to a fixed location before using them for compression or decompression should mitigate some, but not all, of these cases. At least one temporary decompression buffer is internal to the library and never pinned.

Read the publisher's advisory

Affected versions, risk and source history

cve-program · CVE-2023-28638

Published

Snappier

Vendor product

Publisher's version information

Shown as published. These rules are not interpreted as NuGet package version ranges.

{
                    "vendor": "brantburnett",
                    "product": "Snappier",
                    "versions": [
                        {
                            "version": "= 1.1.0",
                            "status": "affected"
                        }
                    ]
                }

Original source record · Cite this exact observation · Complete original publisher JSON

euvd · EUVD-2023-0935

Published

EUVD source date text has no stated timezone and is retained without inventing a UTC instant. Related bulletin membership is not an alias, common cause or applicability claim. A missing vector with a zero score is treated as unrated. Complete vendor/product and underlying source evidence remains in the original JSON.

Original publisher date fields

datePublished: Mar 27, 2023, 8:43:20 PM

dateUpdated: Feb 18, 2025, 9:11:44 PM

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

nvd · CVE-2023-28638

Published

NVD analysis and CPE criteria are source context, not proof that a package or your environment is affected. Complete affected data, logical configurations and SSVC are retained in the original JSON.

Source analysis status: Modified

Weakness classifications: CWE-119

Original publisher date fields

published: 2023-03-27T21:15:12.603

lastModified: 2026-06-17T05:48:26.773

1 source CPE criteria · context only
  • cpe:2.3:a:snappier_project:snappier:1.1.0:*:*:*:*:*:*:*

The original JSON retains the logical configuration operators, exclusions and version bounds.

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

osv · GHSA-838x-pcvx-6p5w

Published

Snappier

NuGet

ECOSYSTEM · introduced 1.1.0 → fixed 1.1.1

1 versions listed as affected

1.1.0

Original source record · Cite this exact observation · Complete original publisher JSON

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 19 Nov 09:03 UTC · 273 of 275 readable · 269 fully read · documentation 469/469 current