Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

Microsoft Edge: 156.0.4314.80 to 157.0.4341.46

3 new settings, 1 changed since 156.0.4314.80. 3 retained releases apart.

Wording or translations only

15 settings · compared with 156.0.4314.80
  • Computer and user · Microsoft Edge\HTTP authentication
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … schemes Microsoft Edge supports regardless of the 'AuthSchemes' (Supported authentication schemes) poli…[added: Starting in Microsoft Edge version 161, this policy applies only to destination server origins and doesn'…]Format the origin pattern according to this format [removed: (https://support.google.com/chrome/a?p=url_blocklist_filter_format).][added: (https://go.microsoft.com/fwlink/?linkid=2095322).] Up to 1,000 exceptions can be defined in 'AllHttpAuthSchemesAllowedForOrigins' (List of origins …
      Whole description, marked

      Set this policy to specify which origins allow all the HTTP authentication schemes Microsoft Edge supports regardless of the 'AuthSchemes' (Supported authentication schemes) policy. [added: Starting in Microsoft Edge version 161, this policy applies only to destination server origins and doesn't apply to proxy server authentication challenges. To allow all HTTP authentication schemes for proxy servers, use the 'AllHttpAuthSchemesAllowedForProxies' (List of proxy servers that allow all HTTP authentication schemes) policy instead. Before version 161, proxy servers matching this policy can also use all HTTP authentication schemes unless 'AllHttpAuthSchemesAllowedForProxies' is configured. ]Format the origin pattern according to this format [removed: (https://support.google.com/chrome/a?p=url_blocklist_filter_format).][added: (https://go.microsoft.com/fwlink/?linkid=2095322).] Up to 1,000 exceptions can be defined in 'AllHttpAuthSchemesAllowedForOrigins' (List of origins that allow all HTTP authentication). Wildcards are allowed for the host component (e.g., '*:8000' matches all hosts on port 8000). To match all schemes or all ports, omit the component entirely (e.g., 'example.com' matches any scheme and any port). A hostname (e.g., 'example.com') also matches its subdomains. To match a host exactly and exclude its subdomains, prepend it with a dot (e.g., '.example.com'). To match all origins, use a single asterisk ('*'). Example value: *.example.com

  • Computer and user · Microsoft Edge\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: AutoDiscardSleepingTabsEnabled
    • Description [removed: Setting this policy enables inactive (sle…][added: This policy setting lets you configure wh…] to [removed: be automatically discarded after 1.5 days of…][added: turn on auto discard. Auto discard reduces me…] When the user switches back to a discarded t…[removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned…] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the bro…] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the …
      Whole description, marked

      [removed: Setting this policy enables inactive (sleeping) tabs][added: This policy setting lets you configure whether] to [removed: be automatically discarded after 1.5 days of inactivity. This is done to save memory.][added: turn on auto discard. Auto discard reduces memory usage by discarding inactive background tabs.] When the user switches back to a discarded tab, the tab [removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned on. Microsoft Edge discards an eligible background tab after it has remained in the background through three consecutive browsing sessions, including] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the browser] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the [removed: 'SleepingTabsEnabled' is disabled, then this feature is disabled by default and can't be enabled. If enabled, idle background tabs will be discarded after 1.5 days.][added: previous session, or more than 18 hours on devices with 16 GB or more of memory. The tab's inactivity period starts over when the user switches to it or navigates to it.] If [removed: disabled, idle background tab won't be discarded after 1.5 days. Tabs can still be discarded for other reasons if ][added: this policy is enabled, auto discard is turned on. If this policy is disabled, auto discard is turned off. If ]this policy is [removed: disabled.][added: not configured, auto discard is turned on.]

  • Computer and user · Microsoft Edge - Default Settings (users can override)\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: AutoDiscardSleepingTabsEnabled
    • Description [removed: Setting this policy enables inactive (sle…][added: This policy setting lets you configure wh…] to [removed: be automatically discarded after 1.5 days of…][added: turn on auto discard. Auto discard reduces me…] When the user switches back to a discarded t…[removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned…] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the bro…] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the …
      Whole description, marked

      [removed: Setting this policy enables inactive (sleeping) tabs][added: This policy setting lets you configure whether] to [removed: be automatically discarded after 1.5 days of inactivity. This is done to save memory.][added: turn on auto discard. Auto discard reduces memory usage by discarding inactive background tabs.] When the user switches back to a discarded tab, the tab [removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned on. Microsoft Edge discards an eligible background tab after it has remained in the background through three consecutive browsing sessions, including] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the browser] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the [removed: 'SleepingTabsEnabled' is disabled, then this feature is disabled by default and can't be enabled. If enabled, idle background tabs will be discarded after 1.5 days.][added: previous session, or more than 18 hours on devices with 16 GB or more of memory. The tab's inactivity period starts over when the user switches to it or navigates to it.] If [removed: disabled, idle background tab won't be discarded after 1.5 days. Tabs can still be discarded for other reasons if ][added: this policy is enabled, auto discard is turned on. If this policy is disabled, auto discard is turned off. If ]this policy is [removed: disabled.][added: not configured, auto discard is turned on.]

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Translations changed.
  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … information on valid site URL patter…[removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For exa…] only [added: for subdomain.contoso.com applies to subdomain.contoso…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use…]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites that are allowed to run JavaScript with JIT (Just In Time) compiler enabled. For detailed information on valid site URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default] to [removed: contoso.com][added: the profile's JavaScript JIT setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 155 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the [removed: JavaScriptJitAllowedForSites policy][added: 'JavaScriptJitAllowedForSites' (Allow JavaScript to use JIT on these sites) policy,] but contoso.com loads a frame [removed: containing fabrikam.com then][added: that contains fabrikam.com,] contoso.com [removed: will have ][added: has ]JavaScript JIT [removed: enabled, but][added: enabled. However,] fabrikam.com [removed: will use ][added: uses ]the policy from [removed: 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), ][added: 'DefaultJavaScriptJitSetting', ]if set, or [removed: default][added: defaults] to JavaScript JIT enabled.[added: Blocklist entries have higher priority than allowlist entries, and allowlist entries have higher priority than the configured default value.] If you don't configure this policy for a [removed: site then ][added: site, ]the policy from 'DefaultJavaScriptJitSetting' applies to the site, if [removed: set, otherwise Javascript][added: set. Otherwise, JavaScript] JIT is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … detailed information on valid URL pa…[removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For exa…] only [added: for subdomain.contoso.com applies to subdomain.contoso…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com will][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites that aren't allowed to run JavaScript JIT (Just In Time) compiler enabled. Disabling the JavaScript JIT means that Microsoft Edge may render web content more slowly, and may also disable parts of JavaScript including WebAssembly. Disabling the JavaScript JIT may allow Microsoft Edge to render web content in a more secure configuration. For detailed information on valid URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com will][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may] not [removed: correctly apply][added: be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default] to [removed: contoso.com][added: the profile's JavaScript JIT setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 155 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there is no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the [removed: JavaScriptJitBlockedForSites policy][added: 'JavaScriptJitBlockedForSites' (Block JavaScript from using JIT on these sites) policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript JIT [removed: disabled, but][added: disabled. However,] fabrikam.com uses the policy from [removed: 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), ][added: 'DefaultJavaScriptJitSetting', ]if set, or [removed: default][added: defaults] to JavaScript JIT enabled.[added: Blocklist entries have higher priority than allowlist entries, and allowlist entries have higher priority than the configured default value.] If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptJitSetting' applies to the site, if [removed: set; otherwise,][added: set. Otherwise,] JavaScript JIT is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … which advanced JavaScript optimizati…[removed: url][added: URL] patterns, see https://go.microsoft.com/fwli…[removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a pol…] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without af…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites for which advanced JavaScript optimizations are enabled. For detailed information on valid site [removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com doesn't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), if set, or default] to [removed: contoso.com][added: the profile's JavaScript optimization setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 138 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the 'JavaScriptOptimizerAllowedForSites' (Allow JavaScript optimization on these sites) [removed: policy][added: policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript optimizations [removed: enabled, but][added: enabled. However,] fabrikam.com uses the policy from [removed: 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), ][added: 'DefaultJavaScriptOptimizerSetting', ]if set, or [removed: default][added: defaults] to JavaScript optimizations enabled. Blocklist entries have higher priority than allowlist entries, [removed: which in turn][added: and allowlist entries] have higher priority than the configured default value. If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptOptimizerSetting' applies to the site, if [removed: set, otherwise Javascript][added: set. Otherwise, JavaScript] optimization is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description Allows you to set a list of site [removed: url][added: URL] patterns that specify sites for which advanced J…[removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095…[removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be …
      Whole description, marked

      Allows you to set a list of site [removed: url][added: URL] patterns that specify sites for which advanced JavaScript optimizations are disabled. Disabling JavaScript optimizations means that Microsoft Edge may render web content more slowly. For detailed information on valid [removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), if set, or default] to [removed: contoso.com][added: the profile's JavaScript optimization setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 138 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and isn't based [added: only ]on [added: the ]top-level origin [removed: url alone; so, for ][added: URL. For ]example, if contoso.com is listed in the 'JavaScriptOptimizerBlockedForSites' (Block JavaScript optimizations on these sites) [removed: policy][added: policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript optimizations [removed: disabled, but][added: disabled. However,] fabrikam.com [removed: will use ][added: uses ]the policy from [removed: 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), ][added: 'DefaultJavaScriptOptimizerSetting', ]if set, or [removed: default][added: defaults] to JavaScript optimizations enabled. Blocklist entries have higher priority than allowlist entries, [removed: which in turn][added: and allowlist entries] have higher priority than the configured default value. If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptOptimizerSetting' applies to the site, if [removed: set; otherwise,][added: set. Otherwise,] JavaScript optimization is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: RoamingProfileSupportEnabled
    • Description … this policy. For more information on using roaming user profiles, see https://go.microsoft.com/fwlink/?linkid=2150058.[added: Note: This policy is deprecated in Chromium. Microsoft Edge won't deprecate this policy on the same timeline as Chromium. Microsoft will provide customers with 60 days' notice in the Microsoft 365 Message Center and in this policy's documentation before deprecating it.]
      Whole description, marked

      Enable this policy to use roaming profiles on Windows. The settings stored in Microsoft Edge profiles (favorites and preferences) are also saved to a file stored in the Roaming user profile folder (or the location specified by the administrator through the 'RoamingProfileLocation' (Set the roaming profile directory) policy). If you disable this policy or don't configure it, only the regular local profiles are used. The 'SyncDisabled' (Disable synchronization of data using Microsoft sync services) only disables cloud synchronization and has no effect on this policy. For more information on using roaming user profiles, see https://go.microsoft.com/fwlink/?linkid=2150058.[added: Note: This policy is deprecated in Chromium. Microsoft Edge won't deprecate this policy on the same timeline as Chromium. Microsoft will provide customers with 60 days' notice in the Microsoft 365 Message Center and in this policy's documentation before deprecating it.]

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: ShowTabPreviewEnabled
    • Description This policy controls whether Microsoft Ed…[added: and memory usage ]when the user hovers over a tab. If you en…[removed: or don't configure ]this policy, Microsoft Edge shows a tab previe…[added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose…]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both sett…]
      Whole description, marked

      This policy controls whether Microsoft Edge displays a preview of the tab content [added: and memory usage ]when the user hovers over a tab. If you enable [removed: or don't configure ]this policy, Microsoft Edge shows a tab preview [added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose whether tab previews and memory usage are shown on ]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both settings.]

  • Computer and user · Microsoft Edge - Default Settings (users can override)
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: ShowTabPreviewEnabled
    • Description This policy controls whether Microsoft Ed…[added: and memory usage ]when the user hovers over a tab. If you en…[removed: or don't configure ]this policy, Microsoft Edge shows a tab previe…[added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose…]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both sett…]
      Whole description, marked

      This policy controls whether Microsoft Edge displays a preview of the tab content [added: and memory usage ]when the user hovers over a tab. If you enable [removed: or don't configure ]this policy, Microsoft Edge shows a tab preview [added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose whether tab previews and memory usage are shown on ]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both settings.]

  • Computer and user · Microsoft Edge\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu
      Whole description, marked

      Define a list of sites, based on URL patterns, that aren't allowed to be put to sleep by sleeping tabs. Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu

  • Computer and user · Microsoft Edge - Default Settings (users can override)\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: Not specified
    • Description … Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu
      Whole description, marked

      Define a list of sites, based on URL patterns, that aren't allowed to be put to sleep by sleeping tabs. Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu

  • Computer and user · Microsoft Edge\SmartScreen settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Translations changed.
  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … Wildcards aren't permitted. Entries that don't meet these requirements will be ignored. [added: This policy only applies to affiliated users. ]For more information about the WebAuthn Remote Desktop Support feature, see https://github.com/w3c/webauthn/wiki/Explainer:-Remote-Desktop-Support/a4e158c569f456c759d0ddd294a9015bd4d4eb9a. …
      Whole description, marked

      This policy defines a list of allowed HTTPS origins for remote desktop client applications that initiate WebAuthn API requests from a browsing session on a remote host. Origins specified in this policy can request WebAuthn authentication for Relying Party IDs (RP IDs) they wouldn't typically be authorized to claim. Only HTTPS origins are supported. Wildcards aren't permitted. Entries that don't meet these requirements will be ignored. [added: This policy only applies to affiliated users. ]For more information about the WebAuthn Remote Desktop Support feature, see https://github.com/w3c/webauthn/wiki/Explainer:-Remote-Desktop-Support/a4e158c569f456c759d0ddd294a9015bd4d4eb9a. Example value: https://server:8080/

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 18 Nov 23:31 UTC · 273 of 275 readable · 270 fully read · documentation 469/469 current