Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

Microsoft Edge 157.0.4341.42

3 new settings, 1 changed since 156.0.4314.84.

Wording or translations only

15 settings · compared with 156.0.4314.84
  • Computer and user · Microsoft Edge\HTTP authentication
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … schemes Microsoft Edge supports regardless of the 'AuthSchemes' (Supported authentication schemes) poli…[added: Starting in Microsoft Edge version 161, this policy applies only to destination server origins and doesn'…]Format the origin pattern according to this format [removed: (https://support.google.com/chrome/a?p=url_blocklist_filter_format).][added: (https://go.microsoft.com/fwlink/?linkid=2095322).] Up to 1,000 exceptions can be defined in 'AllHttpAuthSchemesAllowedForOrigins' (List of origins …
      Whole description, marked

      Set this policy to specify which origins allow all the HTTP authentication schemes Microsoft Edge supports regardless of the 'AuthSchemes' (Supported authentication schemes) policy. [added: Starting in Microsoft Edge version 161, this policy applies only to destination server origins and doesn't apply to proxy server authentication challenges. To allow all HTTP authentication schemes for proxy servers, use the 'AllHttpAuthSchemesAllowedForProxies' (List of proxy servers that allow all HTTP authentication schemes) policy instead. Before version 161, proxy servers matching this policy can also use all HTTP authentication schemes unless 'AllHttpAuthSchemesAllowedForProxies' is configured. ]Format the origin pattern according to this format [removed: (https://support.google.com/chrome/a?p=url_blocklist_filter_format).][added: (https://go.microsoft.com/fwlink/?linkid=2095322).] Up to 1,000 exceptions can be defined in 'AllHttpAuthSchemesAllowedForOrigins' (List of origins that allow all HTTP authentication). Wildcards are allowed for the host component (e.g., '*:8000' matches all hosts on port 8000). To match all schemes or all ports, omit the component entirely (e.g., 'example.com' matches any scheme and any port). A hostname (e.g., 'example.com') also matches its subdomains. To match a host exactly and exclude its subdomains, prepend it with a dot (e.g., '.example.com'). To match all origins, use a single asterisk ('*'). Example value: *.example.com

  • Computer and user · Microsoft Edge\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: AutoDiscardSleepingTabsEnabled
    • Description [removed: Setting this policy enables inactive (sle…][added: This policy setting lets you configure wh…] to [removed: be automatically discarded after 1.5 days of…][added: turn on auto discard. Auto discard reduces me…] When the user switches back to a discarded t…[removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned…] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the bro…] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the …
      Whole description, marked

      [removed: Setting this policy enables inactive (sleeping) tabs][added: This policy setting lets you configure whether] to [removed: be automatically discarded after 1.5 days of inactivity. This is done to save memory.][added: turn on auto discard. Auto discard reduces memory usage by discarding inactive background tabs.] When the user switches back to a discarded tab, the tab [removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned on. Microsoft Edge discards an eligible background tab after it has remained in the background through three consecutive browsing sessions, including] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the browser] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the [removed: 'SleepingTabsEnabled' is disabled, then this feature is disabled by default and can't be enabled. If enabled, idle background tabs will be discarded after 1.5 days.][added: previous session, or more than 18 hours on devices with 16 GB or more of memory. The tab's inactivity period starts over when the user switches to it or navigates to it.] If [removed: disabled, idle background tab won't be discarded after 1.5 days. Tabs can still be discarded for other reasons if ][added: this policy is enabled, auto discard is turned on. If this policy is disabled, auto discard is turned off. If ]this policy is [removed: disabled.][added: not configured, auto discard is turned on.]

  • Computer and user · Microsoft Edge - Default Settings (users can override)\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: AutoDiscardSleepingTabsEnabled
    • Description [removed: Setting this policy enables inactive (sle…][added: This policy setting lets you configure wh…] to [removed: be automatically discarded after 1.5 days of…][added: turn on auto discard. Auto discard reduces me…] When the user switches back to a discarded t…[removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned…] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the bro…] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the …
      Whole description, marked

      [removed: Setting this policy enables inactive (sleeping) tabs][added: This policy setting lets you configure whether] to [removed: be automatically discarded after 1.5 days of inactivity. This is done to save memory.][added: turn on auto discard. Auto discard reduces memory usage by discarding inactive background tabs.] When the user switches back to a discarded tab, the tab [removed: needs to be reloaded. If][added: is reloaded. By default, auto discard is turned on. Microsoft Edge discards an eligible background tab after it has remained in the background through three consecutive browsing sessions, including] the [removed: 'SleepingTabsEnabled' (Configure sleeping tabs) policy][added: current one. A new browsing session begins when the browser] is [removed: enabled, then this feature is enabled by default. If][added: used more than 12 hours after the start of] the [removed: 'SleepingTabsEnabled' is disabled, then this feature is disabled by default and can't be enabled. If enabled, idle background tabs will be discarded after 1.5 days.][added: previous session, or more than 18 hours on devices with 16 GB or more of memory. The tab's inactivity period starts over when the user switches to it or navigates to it.] If [removed: disabled, idle background tab won't be discarded after 1.5 days. Tabs can still be discarded for other reasons if ][added: this policy is enabled, auto discard is turned on. If this policy is disabled, auto discard is turned off. If ]this policy is [removed: disabled.][added: not configured, auto discard is turned on.]

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Translations changed.
  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … information on valid site URL patter…[removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For exa…] only [added: for subdomain.contoso.com applies to subdomain.contoso…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use…]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites that are allowed to run JavaScript with JIT (Just In Time) compiler enabled. For detailed information on valid site URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default] to [removed: contoso.com][added: the profile's JavaScript JIT setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 155 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the [removed: JavaScriptJitAllowedForSites policy][added: 'JavaScriptJitAllowedForSites' (Allow JavaScript to use JIT on these sites) policy,] but contoso.com loads a frame [removed: containing fabrikam.com then][added: that contains fabrikam.com,] contoso.com [removed: will have ][added: has ]JavaScript JIT [removed: enabled, but][added: enabled. However,] fabrikam.com [removed: will use ][added: uses ]the policy from [removed: 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), ][added: 'DefaultJavaScriptJitSetting', ]if set, or [removed: default][added: defaults] to JavaScript JIT enabled.[added: Blocklist entries have higher priority than allowlist entries, and allowlist entries have higher priority than the configured default value.] If you don't configure this policy for a [removed: site then ][added: site, ]the policy from 'DefaultJavaScriptJitSetting' applies to the site, if [removed: set, otherwise Javascript][added: set. Otherwise, JavaScript] JIT is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … detailed information on valid URL pa…[removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For exa…] only [added: for subdomain.contoso.com applies to subdomain.contoso…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com will][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites that aren't allowed to run JavaScript JIT (Just In Time) compiler enabled. Disabling the JavaScript JIT means that Microsoft Edge may render web content more slowly, and may also disable parts of JavaScript including WebAssembly. Disabling the JavaScript JIT may allow Microsoft Edge to render web content in a more secure configuration. For detailed information on valid URL patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript JIT][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com will][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may] not [removed: correctly apply][added: be enforced. Instead, sites use the policy from 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), if set, or default] to [removed: contoso.com][added: the profile's JavaScript JIT setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 155 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there is no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the [removed: JavaScriptJitBlockedForSites policy][added: 'JavaScriptJitBlockedForSites' (Block JavaScript from using JIT on these sites) policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript JIT [removed: disabled, but][added: disabled. However,] fabrikam.com uses the policy from [removed: 'DefaultJavaScriptJitSetting' (Control use of JavaScript JIT), ][added: 'DefaultJavaScriptJitSetting', ]if set, or [removed: default][added: defaults] to JavaScript JIT enabled.[added: Blocklist entries have higher priority than allowlist entries, and allowlist entries have higher priority than the configured default value.] If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptJitSetting' applies to the site, if [removed: set; otherwise,][added: set. Otherwise,] JavaScript JIT is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … which advanced JavaScript optimizati…[removed: url][added: URL] patterns, see https://go.microsoft.com/fwli…[removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a pol…] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without af…]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]…
      Whole description, marked

      Allows you to set a list of site URL patterns that specify sites for which advanced JavaScript optimizations are enabled. For detailed information on valid site [removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com doesn't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), if set, or default] to [removed: contoso.com][added: the profile's JavaScript optimization setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 138 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and [removed: not][added: isn't] based [added: only ]on [added: the ]top-level origin [removed: URL alone; so, for ][added: URL. For ]example, if contoso.com is listed in the 'JavaScriptOptimizerAllowedForSites' (Allow JavaScript optimization on these sites) [removed: policy][added: policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript optimizations [removed: enabled, but][added: enabled. However,] fabrikam.com uses the policy from [removed: 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), ][added: 'DefaultJavaScriptOptimizerSetting', ]if set, or [removed: default][added: defaults] to JavaScript optimizations enabled. Blocklist entries have higher priority than allowlist entries, [removed: which in turn][added: and allowlist entries] have higher priority than the configured default value. If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptOptimizerSetting' applies to the site, if [removed: set, otherwise Javascript][added: set. Otherwise, JavaScript] optimization is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge\Content settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description Allows you to set a list of site [removed: url][added: URL] patterns that specify sites for which advanced J…[removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095…[removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be …
      Whole description, marked

      Allows you to set a list of site [removed: url][added: URL] patterns that specify sites for which advanced JavaScript optimizations are disabled. Disabling JavaScript optimizations means that Microsoft Edge may render web content more slowly. For detailed information on valid [removed: url][added: URL] patterns, see https://go.microsoft.com/fwlink/?linkid=2095322. Wildcards, *, are allowed. [removed: JavaScript optimization][added: You can set] policy exceptions [removed: will][added: for specific subdomains and entire sites. For example, a policy set] only [added: for subdomain.contoso.com applies to subdomain.contoso.com without affecting contoso.com. In some cases, when a subdomain can't ]be [removed: enforced at a site granularity (eTLD+1). A][added: isolated from its parent site, it may inherit the] policy set [added: on the parent site. Exceptions also may not take effect ]for [removed: only subdomain.contoso.com won't correctly apply][added: frames loaded in an existing tab until the site is opened in a new tab. On low-memory Android devices, site-specific exceptions may not be enforced. Instead, sites use the policy from 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), if set, or default] to [removed: contoso.com][added: the profile's JavaScript optimization setting. To enforce exceptions, Microsoft Edge may place sites or subdomains with settings that differ from the default in dedicated processes. This behavior can increase memory usage, especially on Android devices] or [removed: subdomain.contoso.com since they both resolve][added: when a wildcard pattern matches many subdomains, because each matching origin may be isolated separately. Isolated subdomains also can't use document.domain] to [added: access their parent site. Note: In version 138 and earlier, policy exceptions were enforced only at ]the [removed: same eTLD+1 (contoso.com)][added: site level (eTLD+1). A policy set only] for [removed: which there's no policy. In this case,][added: subdomain.contoso.com didn't take effect, even for subdomain.contoso.com. The] policy [removed: must][added: had to] be set on contoso.com to apply [removed: correctly for ][added: to ]both contoso.com and subdomain.contoso.com. This policy applies on a frame-by-frame basis and isn't based [added: only ]on [added: the ]top-level origin [removed: url alone; so, for ][added: URL. For ]example, if contoso.com is listed in the 'JavaScriptOptimizerBlockedForSites' (Block JavaScript optimizations on these sites) [removed: policy][added: policy,] but contoso.com loads a frame [removed: containing][added: that contains] fabrikam.com, [removed: then ]contoso.com has JavaScript optimizations [removed: disabled, but][added: disabled. However,] fabrikam.com [removed: will use ][added: uses ]the policy from [removed: 'DefaultJavaScriptOptimizerSetting' (Control use of JavaScript optimizers), ][added: 'DefaultJavaScriptOptimizerSetting', ]if set, or [removed: default][added: defaults] to JavaScript optimizations enabled. Blocklist entries have higher priority than allowlist entries, [removed: which in turn][added: and allowlist entries] have higher priority than the configured default value. If you don't configure this policy for a site, [removed: then ]the policy from 'DefaultJavaScriptOptimizerSetting' applies to the site, if [removed: set; otherwise,][added: set. Otherwise,] JavaScript optimization is enabled for the site. Example value: [*.]example.edu

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: RoamingProfileSupportEnabled
    • Description … this policy. For more information on using roaming user profiles, see https://go.microsoft.com/fwlink/?linkid=2150058.[added: Note: This policy is deprecated in Chromium. Microsoft Edge won't deprecate this policy on the same timeline as Chromium. Microsoft will provide customers with 60 days' notice in the Microsoft 365 Message Center and in this policy's documentation before deprecating it.]
      Whole description, marked

      Enable this policy to use roaming profiles on Windows. The settings stored in Microsoft Edge profiles (favorites and preferences) are also saved to a file stored in the Roaming user profile folder (or the location specified by the administrator through the 'RoamingProfileLocation' (Set the roaming profile directory) policy). If you disable this policy or don't configure it, only the regular local profiles are used. The 'SyncDisabled' (Disable synchronization of data using Microsoft sync services) only disables cloud synchronization and has no effect on this policy. For more information on using roaming user profiles, see https://go.microsoft.com/fwlink/?linkid=2150058.[added: Note: This policy is deprecated in Chromium. Microsoft Edge won't deprecate this policy on the same timeline as Chromium. Microsoft will provide customers with 60 days' notice in the Microsoft 365 Message Center and in this policy's documentation before deprecating it.]

  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: ShowTabPreviewEnabled
    • Description This policy controls whether Microsoft Ed…[added: and memory usage ]when the user hovers over a tab. If you en…[removed: or don't configure ]this policy, Microsoft Edge shows a tab previe…[added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose…]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both sett…]
      Whole description, marked

      This policy controls whether Microsoft Edge displays a preview of the tab content [added: and memory usage ]when the user hovers over a tab. If you enable [removed: or don't configure ]this policy, Microsoft Edge shows a tab preview [added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose whether tab previews and memory usage are shown on ]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both settings.]

  • Computer and user · Microsoft Edge - Default Settings (users can override)
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: ShowTabPreviewEnabled
    • Description This policy controls whether Microsoft Ed…[added: and memory usage ]when the user hovers over a tab. If you en…[removed: or don't configure ]this policy, Microsoft Edge shows a tab previe…[added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose…]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both sett…]
      Whole description, marked

      This policy controls whether Microsoft Edge displays a preview of the tab content [added: and memory usage ]when the user hovers over a tab. If you enable [removed: or don't configure ]this policy, Microsoft Edge shows a tab preview [added: and memory usage ]when the user hovers over a [removed: tab.][added: tab, and users can't turn them off.] If you disable this policy, tab previews [added: and memory usage, including high memory usage alerts, ]aren't shown on [added: hover, and users can't turn them on. If you don't configure this policy, users can choose whether tab previews and memory usage are shown on ]hover.[added: You can also set this policy as a recommendation. This means that the recommended value controls the default for tab previews and memory usage, but users can change both settings.]

  • Computer and user · Microsoft Edge\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu
      Whole description, marked

      Define a list of sites, based on URL patterns, that aren't allowed to be put to sleep by sleeping tabs. Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu

  • Computer and user · Microsoft Edge - Default Settings (users can override)\Sleeping tabs settings
    Registry key: Software\Policies\Microsoft\Edge\Recommended · Value name: Not specified
    • Description … Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu
      Whole description, marked

      Define a list of sites, based on URL patterns, that aren't allowed to be put to sleep by sleeping tabs. Sites in this list are also excluded from other performance optimizations like [removed: efficiency mode][added: energy saver] and tab discard. [removed: If][added: This list applies regardless of] the [removed: policy ]'SleepingTabsEnabled' (Configure sleeping tabs) [removed: is disabled, this list isn't used and no sites are put to sleep automatically.][added: policy setting.] If you don't configure this policy, all sites are eligible to be put to sleep unless the user's personal configuration[added: or a site list maintained by Microsoft Edge] blocks them. Example value: https://www.contoso.com [*.]contoso.edu

  • Computer and user · Microsoft Edge\SmartScreen settings
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Translations changed.
  • Computer and user · Microsoft Edge
    Registry key: Software\Policies\Microsoft\Edge · Value name: Not specified
    • Description … Wildcards aren't permitted. Entries that don't meet these requirements will be ignored. [added: This policy only applies to affiliated users. ]For more information about the WebAuthn Remote Desktop Support feature, see https://github.com/w3c/webauthn/wiki/Explainer:-Remote-Desktop-Support/a4e158c569f456c759d0ddd294a9015bd4d4eb9a. …
      Whole description, marked

      This policy defines a list of allowed HTTPS origins for remote desktop client applications that initiate WebAuthn API requests from a browsing session on a remote host. Origins specified in this policy can request WebAuthn authentication for Relying Party IDs (RP IDs) they wouldn't typically be authorized to claim. Only HTTPS origins are supported. Wildcards aren't permitted. Entries that don't meet these requirements will be ignored. [added: This policy only applies to affiliated users. ]For more information about the WebAuthn Remote Desktop Support feature, see https://github.com/w3c/webauthn/wiki/Explainer:-Remote-Desktop-Support/a4e158c569f456c759d0ddd294a9015bd4d4eb9a. Example value: https://server:8080/

Cite this release

The exact files ChangeIntel read; they never change at this address
Release
Microsoft Edge 157.0.4341.42 (stable)
Published
5 Nov 2026 · as the vendor states it, without a time zone
Collected
5 Nov 2026 22:58 UTC
Templates
3 ADMX files, 66 ADML files in 22 languages
Package
MicrosoftEdgePolicyTemplates.cab
File set SHA-256
0c38d160a969619e5ad069c78634466a8d0ff3a7a369a435823d4ef7d80fd41e
Snapshot
b995a634f4ca3d86a89c31b4eb17fdaa94490237694c4f0253b90d041b64381c

Changed template files

46
FileChangeSHA-256 beforeSHA-256 after
cs-CZ/msedge.admlChangeda694ab370e43a6e250dc73aeae28c016d23d019eca9d9d0d812bc0c8bcf41c3f1985eae05815de29e78d7502adb3cf58c855bda43bc5998f21e1feb858fb6dea
cs-CZ/msedgewebview2.admlChangedb4c236807ce9d296010b876dc1eb23249ddaa5fe24ea8765bf02d1457ef6f46ed6ae6dbc2bffdcda969121481c7502ae63f0826b3cec183dfb0263d58f69fd11
da-DK/msedge.admlChanged9f38d71dae72fbc76f73d033dc696ae10adc45a11954f97e6c9751fc3a8d0ed8a82010719fccb7ce97bcb1bd0f47f88ad724c49bab6a89c75744fefdafc042e9
da-DK/msedgewebview2.admlChanged13dcb2aa5602202b9f4256f2bad4e32eb0b61441ca3d0a8a69931f1f4bf0a58ab8df985ca4824fda7641d9b567881e1c5d1953d50a7e74a475b43991f829c952
de-DE/msedge.admlChanged1e6a51c4f5f9d4fccbcfc2b6fe9888901ac06b30b1eea772db9c9d1baab56dd38cf20a8b41c9b8e13ab07a64fc6b8c1b26ffebfade83ebee6da4ea35371b9e7f
de-DE/msedgewebview2.admlChangede3336c2b10d5b0997e6e21566cf6cb02367b697401352193b8f6591be58f38ec7d32e35c7dfbc74b228912bfb20b81e2722bf98fdf46f93f29aa14b67af31944
el-GR/msedge.admlChangedc3098f8890d5a1ed692c740df666b3726442cc4488165a2ffffc60047dd6778ad2e13fe9eea53af559d28b10963da58884ea0aaf020bfa480643a69c16c42aa4
el-GR/msedgewebview2.admlChangedc275ef2f5b8a32a9579a13c39042e4f000b89235cd44ed5f3c3ea9ef315f318accace6184f86b779d35d0cecc3dc5e3e7abeffcad80590e9b04f1e951e7833f1
en-US/msedge.admlChanged7438daeffdfdc1d483745af22452e89c2332bea169631ae67a51cef0832b2fd911e634f3cf3cd60a7ff200c9ac997e63508046f240b6b57e54467bdde5d3c446
en-US/msedgewebview2.admlChanged5ebd4b32554d524faa6e0503e60bb0dd98c3f95a9bdd698aa9998bdef246c9bdc9a37eee99b31b69e7fb9c7b7386e415407f1c139fbccba907123211e7140181
es-ES/msedge.admlChanged2eb4799a10a3c3b9b49f4f432c29e281a17289f182d0a0f9bc242e7838c08f6961e576d487b38181d8e897bfbcfc2262a7cda436dc2cfe9aa15600636db20321
es-ES/msedgewebview2.admlChangedec3e8003a2b0666f3c016ab23ab908e13c3eb32a5cdbd9f3b2e8a709e2f6ddbe6f11f8adaf7e2503874b7d3e4c8e76ebcc0a9ffa6685a19299ad28d9fbe0889b
fi-FI/msedge.admlChanged9248081b11960728f1a522b129b1815e835cdc457b9df6d870a6b619d2360ec689cd0769547ff27baade8a80b41b5fc43e543524f16de29c7b65a50a34f6f9fd
fi-FI/msedgewebview2.admlChanged0914bf179b311b2b0075a9026e5eb8c315d0344e1048df969511d2519affd5432e59bd8b817689af6b3bdc04dd01a40e339cd3ea3c4655c94092c79eea4be33a
fr-FR/msedge.admlChanged54b6352b4fd00365182278fb47595fcb204fdf556c6a53be6a1912dce65f80ca27d403bcef2a788debd96f8b705b108f3190e3de8f15218ff299d385ec337ac3
fr-FR/msedgewebview2.admlChanged7148cce4c1c3d2c2d5afae4302dc2cae028a6e59387320035a4b5993fe9715f9b19d3813ebe89c2766f9d7a132f076e90fa966ed673f2030f48bbd6f148172c7
hu-HU/msedge.admlChanged751a975b96e763da7158f30b642da30554471bf16359afd8326afdad2baa8ee3ebdc33ba74f03cf9746d4585764b4a0f341774bcbd9c31d7ef9f24a4ee24f1b3
hu-HU/msedgewebview2.admlChangedfc999e33a2a1ce56b1098ddef24bc3000af66742b6f14adba38cd6667e2b29f32e3d26f4b4ccd6f388edf8588f81f6226dded39bdd0f3aed478c184fbfdc8e5b
it-IT/msedge.admlChangedd70c589b0e7a6c2dd5d4f58f4baa101c65116dacdbbf76d180e63e1fd759126af3a1d7d567d6054529634be7e1b978752eecb5508a6a91cdc50c63c4c8a38ef2
it-IT/msedgewebview2.admlChangedb6ee5a015ee358838f0ff7b733ad197340029da75189d0c8754f9eea7920e52a835c9989d6f7f80f4db819f79b6c074e3d2be290183e8716d1b441abe8bf6f52
ja-JP/msedge.admlChanged5f8cf6a6e9f6c90e12cd1831404bedcf64e20f2d2fbe36627f596b8c4de786bf742977f21f702cf4b1651dcfee5891610bc0726e845e8c744d45eb46f6f1dd3a
ja-JP/msedgewebview2.admlChanged365d3b1c7035dd54cf58c00c11d34f7ac2bc4f70d3eaab1f707407090775b16189a99b906489f541637390c40380db8707783ac862d4ba43ba004c14ee295f37
ko-KR/msedge.admlChangeda737a16d879004ff3d680565c7b9c6b7830751e3df4859598d88a1fefe3a1ffdde258306dcb142f96a22d5ec804c5cf1840177e8d339da11c6f5b326aac2764f
ko-KR/msedgewebview2.admlChangeded9aac8c0190ad5f37c7d271bf299297e7addaf1662e98332d383b55fbdc0f96de66353c53deb05d954721b6aa1f116eb291ca1b295f53a32a3f97aaaa60f80d
msedge.admxChangedce1705c9f7f7f3ced242146a8669a05b7df0aec75cc21f38b8fa2608b02129783b22a961308d2e93ecc996feded238ef0d9a1bc0e3a558cea0e64b81a1a4abee
msedgewebview2.admxChanged9bb138e8c50da0c1b1fa09108b7365a63b0cea92a8f7ad8013291bc28bc0f46200d9a3fa11855c13d673badb5e0dc81cf98e4798f51d2ba121a3c4b696b11be3
nb-NO/msedge.admlChangedf7b3398bab7bd8e6ac45ccd1dfaf5b5e7c754b85bd945ab176b6864165108cc223b13f707d70ed8fe1be4d85182943ebe4e24df90f3e59049139ae0d067a9a22
nb-NO/msedgewebview2.admlChangeddeac828e449f5430f91505936c28f07be500d0cf8c3b23e3cd19e72856c8979c1715c98a92fc8aa6491433d6d71f2f5208c5ceb84a6d8b8a03a36bda66675579
nl-NL/msedge.admlChanged383d0d1020a1cce2dbb4a99ae1ca290a14c44b72de38e137362c77064bd3700f479294c8923ce97d6ff4ab638542b2c12839d608625d8cf81c69fd27ef5f05fa
nl-NL/msedgewebview2.admlChanged6e04993ea72004e0e16744128e4186657c707a7a7d72ad2fe64cfb9b8673ff83884d000d982fdb6c6573bdedd1fbce894333cd188b39522efef9c55cb85a9751
pl-PL/msedge.admlChanged9c53fb0c8a96e14c7c85398c122bf216836438706b6604a58d9b194f67c927b9bba9315c84f868baa683e4aa368cc62cbd6b2a683dff2a652b3085128e406bc9
pl-PL/msedgewebview2.admlChangede2cf6d8251ea8875a842c2ccb7619cbd8e06a69549f7b6c6abddf1b0a970890172b3bb65d2d38d7d828915a3925c097dd67f720520dce8ce3394e69e4842ef1d
pt-BR/msedge.admlChangedd468bc51972bcf8a26f9179269e833c7bc6b9709285cc7b72e257a4104d51da4b2d6e84b9ffdb7c98fb863a2b5ee57ef7b729097d49f37fa159309fbb3a312d6
pt-BR/msedgewebview2.admlChangeda7646161a1e4792abffccd531dbcf61b97ad8a29437a5940c8bf90f848eb8967457abadcc7c4e640eae3adcfb91dcf2599f5ae2689956edd97dd00d6d64da43c
pt-PT/msedge.admlChanged157619a2e0a4554e9b75adaba3bce4b8f290e74c756edcc66a6fa53fd26bb51da42eadb62498e06ea649300d73e82fc5f8a751063a0b5222709281ee7ea5a491
pt-PT/msedgewebview2.admlChanged925ec94c1b9e909e7e193ccdfbafd076183c1c719e4870b4c4012c70780100aac6c391988291aa9f3922ce4d31698f1789532c8a05681e9e1920bf1a3a0f7fa9
ru-RU/msedge.admlChangedfd30ae761dd621aadcedb044aa562dadecac82ad902a1df97755b53204334fdaeabfebc01bbca9c564a02a6867f12ed7892afa165ad04250ee6da97fd478c763
ru-RU/msedgewebview2.admlChanged58690dd55e2af0a70d5564f115650efbfddd1c8c912757953182638e9d4ddbd407515ed9819c984b31a864634844ad54623b662beac74c60019d5cadc40cb05f
sv-SE/msedge.admlChanged1e5a12c41365e53123209a54492534ef2894996fd738a1f56cd8e86f06e6bfcc7ce25da6cbb6b04e00a77f94fd9d4802557055351e908e41785dd6449ac762b1
sv-SE/msedgewebview2.admlChanged1a54c9f1f64492fe591600b59986a6f9a8ee7be21da4b4dfdd056b8edd73dbe86be76e3c251949b5008a085d31bd93570e3bdbabb88d80a3bc28f965a3f86ec5
tr-TR/msedge.admlChangedccb7d51766970c7f86b84705800d24a2ae581563857106ab3114f3f6056277da4ae930e706a47ef60586a7eb5bd093226888c0accfd4a3ee63d3cdc1f20229a2
tr-TR/msedgewebview2.admlChangedc160837b22ca09d4d2e9ce9ffc6efd3c19333299f4334ab04482149d657e82f4da3249d98df1166346c16ecd2025dbc579704196b16984619fe253376970dd04
zh-CN/msedge.admlChangeda889017a05eba99fe8601b104f8ddd9819b4c7aae1eedc6afc7384c990ebe433f9bb4d9ed55fc5347aa7432899532c8e375e0382de48c25a4851cc83866e5c80
zh-CN/msedgewebview2.admlChanged5c4a0e6a4243d71646649305b270e1e9fec7efedf349a404d9484ecdced2ea63f4cfc51743b1400b1dfa8bb8d1afcd0019c350303bd058dfe195f4ef11704ebb
zh-TW/msedge.admlChanged2f22cb09fd2431dd0012a594d5149e49500dd26238f54316a5b8ac5083377ee3316af51da7c974d61a427bd21c7508d7331899b7d1b882225c1df9f535c2e903
zh-TW/msedgewebview2.admlChanged40f6153babae4a2489f5f46aab48381579281ecc5771b8b60a2f98d7fb084c1958b622b2c12f1f8bbff74de5bc22b444758eef81b909c8d2c0474c2cc555a562
ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 17 Nov 09:08 UTC · 274 of 275 readable · 250 fully read · 20 waiting for GitHub's hourly limit · documentation 469/469 current