Configure Corrupted File Recovery behavior

ComputerNative Intune settingWdiScenarioExecutionPolicy

Supported on At least Windows Vista

23H2 · 1.0

What it does

This policy setting allows you to configure the recovery behavior for corrupted files to one of three states: Regular: Detection, troubleshooting, and recovery of corrupted files will automatically start with a minimal UI display. Windows will attempt to present you with a dialog box when a system restart is required. This is the default recovery behavior for corrupted files. Silent: Detection, troubleshooting, and recovery of corrupted files will automatically start with no UI. Windows will log an administrator event when a system restart is required. This behavior is recommended for headless operation. Troubleshooting Only: Detection and troubleshooting of corrupted files will automatically start with no UI. Recovery is not attempted automatically. Windows will log an administrator event with instructions if manual recovery is possible. If you enable this setting, the recovery behavior for corrupted files will be set to either the regular (default), silent, or troubleshooting only state. If you disable this setting, the recovery behavior for corrupted files will be disabled. No troubleshooting or resolution will be attempted. If you do not configure this setting, the recovery behavior for corrupted files will be set to the regular recovery behavior. No system or service restarts are required for changes to this policy to take immediate effect after a Group Policy refresh. Note: This policy setting will take effect only when the Diagnostic Policy Service (DPS) is in the running state. When the service is stopped or disabled, system file recovery will not be attempted. The DPS can be configured with the Services snap-in to the Microsoft Management Console.

What it writes

Hive: HKEY_LOCAL_MACHINE
Registry key: SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}
Value name: ScenarioExecutionEnabled
When enabled: DWORD 1
When disabled: DWORD 0

Why it needs changes for Intune

Policy references a Windows supportedOn definition.
ADMX-INTUNE-WINDOWS-SUPPORTEDON-REFERENCE

In Intune

Native Intune setting: Yes — Policy CSP

./Device/Vendor/MSFT/Policy/Config/ADMX_FileRecovery/WdiScenarioExecutionPolicyADMX_FileRecovery on Microsoft LearnADMX-backed: Windows ships this template, so it is set with the template's own values, without an import.Windows builds listed: 10.0.22000, 10.0.19043.1202, 10.0.19042.1202, 10.0.19041.1202.

From Microsoft's Policy CSP DDF files (DDF v2 Files, February 2026), read 18 Oct 2026.

Options

Option	Type	Registry value	Allowed values
Scenario Execution LevelRequiredDefault: Regular	Drop-down list	`EnabledScenarioExecutionLevel`	Troubleshooting Only`1` Regular`2` Silent`3`

Configure and deploy

Choose a state and the option values; the output below is generated from the template for exactly that.

Enabled · Computer · template defaults

Registry file (.reg)

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}]
"EnabledScenarioExecutionLevel"=dword:00000002
"ScenarioExecutionEnabled"=dword:00000001

PowerShell

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Configure Corrupted File Recovery behavior
# Name: WdiScenarioExecutionPolicy
# Scope: Machine
# State: Enabled
# Source: FileRecovery.admx

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'ScenarioExecutionEnabled' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'EnabledScenarioExecutionLevel' -PropertyType 'DWord' -Value 2

These deployment candidates come from the ADMX template; they are separate from the native CSP mapping above.

The OMA-URI is an inferred ADMX-backed Policy CSP candidate derived from the source ADMX file name and policy name.
Some Microsoft policies use built-in Policy CSP pages whose area names don't match the ADMX file name, so verify the candidate against Microsoft Learn before deployment.

ADMX profile candidate (OMA-URI)

./Device/Vendor/MSFT/Policy/Config/ADMX_FileRecovery/WdiScenarioExecutionPolicy

ADMX SyncML candidate

<SyncML xmlns="SYNCML:SYNCML1.2">
  <SyncBody>
    <Replace>
      <CmdID>1</CmdID>
      <Item>
        <Meta>
          <Format>chr</Format>
          <Type>text/plain</Type>
        </Meta>
        <Target>
          <LocURI>./Device/Vendor/MSFT/Policy/Config/ADMX_FileRecovery/WdiScenarioExecutionPolicy</LocURI>
        </Target>
        <Data>&lt;enabled/&gt;
&lt;data id="WdiScenarioExecutionPolicyLevel" value="1"/&gt;</Data>
      </Item>
    </Replace>
    <Final/>
  </SyncBody>
</SyncML>

Intune remediation scripts

Detection

$ErrorActionPreference = 'Stop'
$reasons = [System.Collections.Generic.List[string]]::new()

function Test-RegistryValueExists {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    return $null -ne (Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue)
}

function Test-RegistryValueEquals {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $Kind,
        [Parameter(Mandatory = $true)][object] $Expected
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return $false
    }

    $valueObject = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction SilentlyContinue
    if ($null -eq $valueObject) {
        return $false
    }

    $actual = $valueObject.$Name
    switch ($Kind) {
        'String' { return [string]$actual -ceq [string]$Expected }
        'ExpandString' { return [string]$actual -ceq [string]$Expected }
        'DWord' { return [uint32]$actual -eq [uint32]$Expected }
        'QWord' { return [uint64]$actual -eq [uint64]$Expected }
        'MultiString' {
            $actualArray = @($actual)
            $expectedArray = @($Expected)
            if ($actualArray.Count -ne $expectedArray.Count) { return $false }
            for ($index = 0; $index -lt $actualArray.Count; $index++) {
                if ([string]$actualArray[$index] -cne [string]$expectedArray[$index]) { return $false }
            }
            return $true
        }
        'Binary' {
            $actualArray = [byte[]]$actual
            $expectedArray = [byte[]]$Expected
            if ($actualArray.Length -ne $expectedArray.Length) { return $false }
            for ($index = 0; $index -lt $actualArray.Length; $index++) {
                if ($actualArray[$index] -ne $expectedArray[$index]) { return $false }
            }
            return $true
        }
        default { return [string]$actual -ceq [string]$Expected }
    }
}

# Policy: Configure Corrupted File Recovery behavior
# Name: WdiScenarioExecutionPolicy
# Scope: Machine
# State: Enabled
# Source: FileRecovery.admx

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'ScenarioExecutionEnabled' -Kind 'DWord' -Expected 1
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}\ScenarioExecutionEnabled') | Out-Null
}

$isMatch = Test-RegistryValueEquals -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'EnabledScenarioExecutionLevel' -Kind 'DWord' -Expected 2
if (-not $isMatch) {
    $reasons.Add('Value mismatch: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}\EnabledScenarioExecutionLevel') | Out-Null
}

if ($reasons.Count -eq 0) {
    Write-Output 'Compliant'
    exit 0
}

$reasons | ForEach-Object { Write-Output $_ }
exit 1

Remediation

$ErrorActionPreference = 'Stop'

function Set-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name,
        [Parameter(Mandatory = $true)][string] $PropertyType,
        [Parameter(Mandatory = $true)][object] $Value
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        New-Item -Path $Path -Force | Out-Null
    }

    New-ItemProperty -LiteralPath $Path -Name $Name -PropertyType $PropertyType -Value $Value -Force | Out-Null
}

function Remove-RegistryValue {
    param(
        [Parameter(Mandatory = $true)][string] $Path,
        [Parameter(Mandatory = $true)][string] $Name
    )

    if (Test-Path -LiteralPath $Path) {
        Remove-ItemProperty -LiteralPath $Path -Name $Name -Force -ErrorAction SilentlyContinue
    }
}

function Clear-RegistryKeyValues {
    param(
        [Parameter(Mandatory = $true)][string] $Path
    )

    if (-not (Test-Path -LiteralPath $Path)) {
        return
    }

    foreach ($propertyName in (Get-Item -LiteralPath $Path).Property) {
        Remove-ItemProperty -LiteralPath $Path -Name $propertyName -Force -ErrorAction SilentlyContinue
    }
}

# Policy: Configure Corrupted File Recovery behavior
# Name: WdiScenarioExecutionPolicy
# Scope: Machine
# State: Enabled
# Source: FileRecovery.admx

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'ScenarioExecutionEnabled' -PropertyType 'DWord' -Value 1

Set-RegistryValue -Path 'Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}' -Name 'EnabledScenarioExecutionLevel' -PropertyType 'DWord' -Value 2

History 3 retained releases

22H2 · 1.015 Jul 2024
- Already present in the first release ChangeIntel keeps.

2 later releases left it unchanged.

Template

Internal name: WdiScenarioExecutionPolicy
Namespace: Microsoft.Policies.FileRecovery
Template file: FileRecovery.admx
Release: Windows 11 23H2 · 1.0 · file set d784d0ea5f14a680…

Definition, editor controls and support

Definition

<policy class="Machine" displayName="$(string.WdiScenarioExecutionPolicy)" explainText="$(string.WdiScenarioExecutionPolicyExplain)" key="SOFTWARE\Policies\Microsoft\Windows\WDI\{8519d925-541e-4a2b-8b1e-8059d16082f2}" name="WdiScenarioExecutionPolicy" presentation="$(presentation.WdiScenarioExecutionPolicy)" valueName="ScenarioExecutionEnabled" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.FileRecovery:WdiScenarioCategory" />
      <supportedOn ref="Microsoft.Policies.Windows:SUPPORTED_WindowsVista" />
      <enabledValue>
        <decimal value="1" />
      </enabledValue>
      <disabledValue>
        <decimal value="0" />
      </disabledValue>
      <elements>
        <enum id="WdiScenarioExecutionPolicyLevel" required="true" valueName="EnabledScenarioExecutionLevel">
          <item displayName="$(string.WdiScenarioExecutionPolicyLevelTsOnly)">
            <value>
              <decimal value="1" />
            </value>
          </item>
          <item displayName="$(string.WdiScenarioExecutionPolicyLevelResolution)">
            <value>
              <decimal value="2" />
            </value>
          </item>
          <item displayName="$(string.WdiScenarioExecutionPolicyLevelSilent)">
            <value>
              <decimal value="3" />
            </value>
          </item>
        </enum>
      </elements>
    </policy>

Editor controls

<presentation id="WdiScenarioExecutionPolicy" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <dropdownList defaultItem="1" noSort="true" refId="WdiScenarioExecutionPolicyLevel">Scenario Execution Level</dropdownList>
      </presentation>

Supported platforms and category

Microsoft.Policies.FileRecovery:category:WdiScenarioCategory
<category displayName="$(string.WdiScenarioCategory)" name="WdiScenarioCategory" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:Troubleshooting" />
    </category>
Microsoft.Policies.Products:product:MicrosoftWindows
sha256:4b3cb6917b5e5b7cd142c0157f10882786b3e9ee67c29fd7b8f4c6cb2eec5fe7
Microsoft.Policies.Windows:category:System
<category displayName="$(string.System)" explainText="$(string.System_Help)" name="System" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
Microsoft.Policies.Windows:category:Troubleshooting
<category displayName="$(string.Troubleshooting)" name="Troubleshooting" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:System" />
    </category>
Microsoft.Policies.Windows:definition:SUPPORTED_WindowsVista
<definition displayName="$(string.SUPPORTED_WindowsVista)" name="SUPPORTED_WindowsVista" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <or>
          <range minVersionIndex="4" ref="Microsoft.Policies.Products:MicrosoftWindows" />
        </or>
      </definition>
Microsoft.Policies.FileRecovery:category:WdiScenarioCategory
<category displayName="$(string.WdiScenarioCategory)" name="WdiScenarioCategory" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:Troubleshooting" />
    </category>
<strings><string id="Microsoft.Policies.FileRecovery:WdiScenarioCategory">Corrupted File Recovery</string></strings>
Microsoft.Policies.Products:product:MicrosoftWindows
<product displayName="$(string.MicrosoftWindows)" name="MicrosoftWindows" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <majorVersion displayName="$(string.MicrosoftWindows2000)" name="MicrosoftWindows2000" versionIndex="1">
          <minorVersion displayName="$(string.MicrosoftWindows2000_RTM)" name="MicrosoftWindows2000_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP1)" name="MicrosoftWindows2000_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP2)" name="MicrosoftWindows2000_SP2" versionIndex="2" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP3)" name="MicrosoftWindows2000_SP3" versionIndex="3" />
          <minorVersion displayName="$(string.MicrosoftWindows2000_SP4)" name="MicrosoftWindows2000_SP4" versionIndex="4" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsXP)" name="MicrosoftWindowsXP" versionIndex="2">
          <minorVersion displayName="$(string.MicrosoftWindowsXP_RTM)" name="MicrosoftWindowsXP_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsXP_SP1)" name="MicrosoftWindowsXP_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindowsXP_SP2)" name="MicrosoftWindowsXP_SP2" versionIndex="2" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer2003)" name="MicrosoftWindowsServer2003" versionIndex="3">
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_RTM)" name="MicrosoftWindowsServer2003_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_SP1)" name="MicrosoftWindowsServer2003_SP1" versionIndex="1" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_R2)" name="MicrosoftWindowsServer2003_R2" versionIndex="2" />
          <minorVersion displayName="$(string.MicrosoftWindowsServer2003_SP2)" name="MicrosoftWindowsServer2003_SP2" versionIndex="3" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsVista)" name="MicrosoftWindowsVista" versionIndex="4">
          <minorVersion displayName="$(string.MicrosoftWindowsVista_RTM)" name="MicrosoftWindowsVista_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.MicrosoftWindowsVista_SP1)" name="MicrosoftWindowsVista_SP1" versionIndex="1" />
        </majorVersion>
        <majorVersion displayName="$(string.WindowsServer2008)" name="WindowsServer2008" versionIndex="5">
          <minorVersion displayName="$(string.WindowsServer2008_RTM)" name="WindowsServer2008_RTM" versionIndex="0" />
          <minorVersion displayName="$(string.WindowsServer2008_R2)" name="WindowsServer2008_R2" versionIndex="1" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows7)" name="MicrosoftWindows7" versionIndex="6">
          <minorVersion displayName="$(string.MicrosoftWindows7_RTM)" name="MicrosoftWindows7_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer8)" name="MicrosoftWindowsServer8" versionIndex="7">
           <minorVersion displayName="$(string.MicrosoftWindowsServer8_RTM)" name="MicrosoftWindowsServer8_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows8)" name="MicrosoftWindows8" versionIndex="8">
          <minorVersion displayName="$(string.MicrosoftWindows8_RTM)" name="MicrosoftWindows8_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_RT)" name="MicrosoftWindows_RT" versionIndex="9">
          <minorVersion displayName="$(string.MicrosoftWindows_RT_RTM)" name="MicrosoftWindows_RT_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer_6_3)" name="MicrosoftWindowsServer_6_3" versionIndex="10">
           <minorVersion displayName="$(string.MicrosoftWindowsServer_6_3_RTM)" name="MicrosoftWindowsServer_6_3_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_6_3)" name="MicrosoftWindows_6_3" versionIndex="11">
          <minorVersion displayName="$(string.MicrosoftWindows_6_3_RTM)" name="MicrosoftWindows_6_3_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_6_3_RT)" name="MicrosoftWindows_6_3_RT" versionIndex="12">
            <minorVersion displayName="$(string.MicrosoftWindows_6_3_RT_RTM)" name="MicrosoftWindows_6_3_RT_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindowsServer_10_0)" name="MicrosoftWindowsServer_10_0" versionIndex="13">
            <minorVersion displayName="$(string.MicrosoftWindowsServer_10_0_RTM)" name="MicrosoftWindowsServer_10_0_RTM" versionIndex="0" />
          </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_10_0)" name="MicrosoftWindows_10_0" versionIndex="14">
            <minorVersion displayName="$(string.MicrosoftWindows_10_0_RTM)" name="MicrosoftWindows_10_0_RTM" versionIndex="0" />
        </majorVersion>
        <majorVersion displayName="$(string.MicrosoftWindows_10_0_RT)" name="MicrosoftWindows_10_0_RT" versionIndex="15">
            <minorVersion displayName="$(string.MicrosoftWindows_10_0_RT_RTM)" name="MicrosoftWindows_10_0_RT_RTM" versionIndex="0" />
        </majorVersion>
      </product>
<strings><string id="Microsoft.Policies.Products:MicrosoftWindows">Windows operating system</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000">Windows 2000 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_RTM">Windows 2000</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP1">Windows 2000 Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP2">Windows 2000 Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP3">Windows 2000 Service Pack 3</string><string id="Microsoft.Policies.Products:MicrosoftWindows2000_SP4">Windows 2000 Service Pack 4</string><string id="Microsoft.Policies.Products:MicrosoftWindows7">Windows 7 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows7_RTM">Windows 7</string><string id="Microsoft.Policies.Products:MicrosoftWindows8">Windows 8 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows8_RTM">Windows 8</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003">Windows Server 2003 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_R2">Windows Server 2003 R2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_RTM">Windows Server 2003</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_SP1">Windows Server 2003 Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer2003_SP2">Windows Server 2003 Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer8">Windows Server 2012 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer8_RTM">Windows Server 2012</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_10_0">Windows Server 2016 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_10_0_RTM">Windows Server 2016</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_6_3">Windows Server 2012 R2 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsServer_6_3_RTM">Windows Server 2012 R2</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista">Windows Vista operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista_RTM">Windows Vista</string><string id="Microsoft.Policies.Products:MicrosoftWindowsVista_SP1">Windows Vista Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP">Windows XP operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_RTM">Windows XP</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_SP1">Windows XP Service Pack 1</string><string id="Microsoft.Policies.Products:MicrosoftWindowsXP_SP2">Windows XP Service Pack 2</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0">Windows 10 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RT">Windows 10 RT operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RTM">Windows 10</string><string id="Microsoft.Policies.Products:MicrosoftWindows_10_0_RT_RTM">Windows 10 RT</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3">Windows 8.1 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RT">Windows RT 8.1 operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RTM">Windows 8.1</string><string id="Microsoft.Policies.Products:MicrosoftWindows_6_3_RT_RTM">Windows RT 8.1</string><string id="Microsoft.Policies.Products:MicrosoftWindows_RT">Windows RT operating systems</string><string id="Microsoft.Policies.Products:MicrosoftWindows_RT_RTM">Windows RT</string><string id="Microsoft.Policies.Products:WindowsServer2008">Windows Server 2008 operating systems</string><string id="Microsoft.Policies.Products:WindowsServer2008_R2">Windows Server 2008 R2</string><string id="Microsoft.Policies.Products:WindowsServer2008_RTM">Windows Server 2008</string></strings>
Microsoft.Policies.Windows:category:System
<category displayName="$(string.System)" explainText="$(string.System_Help)" name="System" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions" />
<strings><string id="Microsoft.Policies.Windows:System">System</string><string id="Microsoft.Policies.Windows:System_Help">Allows configuration of various system component settings.</string></strings>
Microsoft.Policies.Windows:category:Troubleshooting
<category displayName="$(string.Troubleshooting)" name="Troubleshooting" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
      <parentCategory ref="Microsoft.Policies.Windows:System" />
    </category>
<strings><string id="Microsoft.Policies.Windows:Troubleshooting">Troubleshooting and Diagnostics</string></strings>
Microsoft.Policies.Windows:definition:SUPPORTED_WindowsVista
<definition displayName="$(string.SUPPORTED_WindowsVista)" name="SUPPORTED_WindowsVista" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
        <or>
          <range minVersionIndex="4" ref="Microsoft.Policies.Products:MicrosoftWindows" />
        </or>
      </definition>
<strings><string id="Microsoft.Policies.Windows:SUPPORTED_WindowsVista">At least Windows Vista</string></strings>