Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

gitoxide's gix-path can use a fake program files location

CVSS 3.1 6.8 MEDIUMEUVD CVSS 3.1 6.8 CVSS 3.1 · [email protected] · Secondary 6.8 MEDIUMCVSS_V3 CVSS_V4 Publisher rating HIGHFixed by gix-path 0.10.9CVSS_V3 Fixed by gix-path 0.10.9KEV status unknown

cve-program · CVE-2024-40644

Published

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Read the publisher's advisory

euvd · EUVD-2024-2381

Published

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Read the publisher's advisory

nvd · CVE-2024-40644

Published

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Read the publisher's advisory

osv · GHSA-mgvv-9p9g-3jv4

Published

### Summary When looking for Git for Windows so it can run it to report its paths, `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account. ### Details Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories: https://github.com/Byron/gitoxide/blob/6cd8b4665bb7582f744c3244abaef812be39ec35/gix-path/src/env/git.rs#L9-L14 Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.) ### PoC On a 32-bit (x86) Windows 10 system, with or without Git for Windows installed: 1. Create a limited user account in `lusrmgr.msc` or the Settings application. 2. Log in with that account and, using Windows Explorer or the `mkdir` command in PowerShell, create the directories `C:\Program Files (x86)\Git\mingw32\bin`. Although a limited user account cannot create regular files directly in `C:\`, it can create directories including one called `Program Files (x86)`. 3. Place a copy of `C:\Windows\system32\calc.exe` in `C:\Program Files (x86)\Git\mingw32\bin` and rename it from `calc.exe` to `git.exe`. A different test payload may be used if preferred, and the executable need not already be signed or trusted. 4. Log out, and log in as a different user. This user may be an administrator. 5. If `gitoxide` is not installed, install it. If `cargo install gitoxide` is used for the installation, then the version of `gix-path` used in the installation can be observed. 6. The vulnerability is only exploitable if `git` cannot be found in a `PATH` search. So, in PowerShell, run `gcm git` to check if `git` is present in the `PATH`. If so, temporarily remove it. One way to do this is for the current shell only, by running `$env:PATH` to inspect it and by assigning `$env:PATH = '...'` where `...` omits directories that contain `git`. 7. Some commands that can be run outside a repository, and most commands that can be run inside a repository, will run the Calculator or other payload at least once per invocation. Try `gix clone foo` or, inside of a repository, `gix status`, `gix config`, `gix is-changed`, `gix fetch`, `ein t hours`, or `ein t query`. This is not exhaustive; most other `gix` and `ein` commands that access existing repository state or a network resource likewise run the payload. ### Impact Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This vulnerability is comparable to [CVE-2022-24765](https://github.com/git-for-windows/git/security/advisories/GHSA-vw2c-22j4-2fh2), in which an uncontrolled path like `C:\.git\config`, which a limited user can create, could supply configuration used by other users. However, in this case, exploitation is slightly simpler because, rather than using configuration, an executable is directly run.

Read the publisher's advisory

osv · RUSTSEC-2024-0355

Published

### Summary When looking for Git for Windows so it can run it to report its paths, `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account. ### Details Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking [two hard-coded paths](https://github.com/Byron/gitoxide/blob/6cd8b4665bb7582f744c3244abaef812be39ec35/gix-path/src/env/git.rs#L9-L14) intended to be the 64-bit and 32-bit Program Files directories: ```rust /// Other places to find Git in. #[cfg(windows)] pub(super) static ALTERNATIVE_LOCATIONS: &[&str] = &[ "C:/Program Files/Git/mingw64/bin", "C:/Program Files (x86)/Git/mingw32/bin", ]; ``` Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.) ### PoC On a 32-bit (x86) Windows 10 system, with or without Git for Windows installed: 1. Create a limited user account in `lusrmgr.msc` or the Settings application. 2. Log in with that account and, using Windows Explorer or the `mkdir` command in PowerShell, create the directories `C:\Program Files (x86)\Git\mingw32\bin`. Although a limited user account cannot create regular files directly in `C:\`, it can create directories including one called `Program Files (x86)`. 3. Place a copy of `C:\Windows\system32\calc.exe` in `C:\Program Files (x86)\Git\mingw32\bin` and rename it from `calc.exe` to `git.exe`. A different test payload may be used if preferred, and the executable need not already be signed or trusted. 4. Log out, and log in as a different user. This user may be an administrator. 5. If `gitoxide` is not installed, install it. If `cargo install gitoxide` is used for the installation, then the version of `gix-path` used in the installation can be observed. 6. The vulnerability is only exploitable if `git` cannot be found in a `PATH` search. So, in PowerShell, run `gcm git` to check if `git` is present in the `PATH`. If so, temporarily remove it. One way to do this is for the current shell only, by running `$env:PATH` to inspect it and by assigning `$env:PATH = '...'` where `...` omits directories that contain `git`. 7. Some commands that can be run outside a repository, and most commands that can be run inside a repository, will run the Calculator or other payload at least once per invocation. Try `gix clone foo` or, inside of a repository, `gix status`, `gix config`, `gix is-changed`, `gix fetch`, `ein t hours`, or `ein t query`. This is not exhaustive; most other `gix` and `ein` commands that access existing repository state or a network resource likewise run the payload. ### Impact Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This vulnerability is comparable to [CVE-2022-24765](https://github.com/git-for-windows/git/security/advisories/GHSA-vw2c-22j4-2fh2), in which an uncontrolled path like `C:\.git\config`, which a limited user can create, could supply configuration used by other users. However, in this case, exploitation is slightly simpler because, rather than using configuration, an executable is directly run.

Read the publisher's advisory

Affected versions, risk and source history

Exploitation and risk

Source status

CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.

Which CVEs have scores here?

This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.

No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.

cve-program · CVE-2024-40644

Published

gitoxide's gix-path can use a fake program files location

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Source published
18 Jul 2024 16:56:35 UTC
Source modified
2 Aug 2024 04:33:11 UTC
Saved here
23 Oct 2026 15:48:27 UTC
Source terms
CVE Program Terms of Use

Original source record · Cite this exact observation · Complete original publisher JSON

Source: cve-program · CVE Program Terms of Use. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

CVSS 3.1 · 6.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:L

euvd · EUVD-2024-2381

Published

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user ac…

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Additional publisher context

EUVD source date text has no stated timezone and is retained without inventing a UTC instant. Related bulletin membership is not an alias, common cause or applicability claim. A missing vector with a zero score is treated as unrated. Complete vendor/product and underlying source evidence remains in the original JSON.

Original publisher date fields

datePublished: Jul 18, 2024, 4:56:35 PM

dateUpdated: Aug 2, 2024, 4:33:11 AM

1 related source bulletins · separate from aliases

msrc_CVE-2024-40644: gitoxide's gix-path can use a fake program files location

CVE-2024-40644

Source published
Jul 18, 2024, 4:56:35 PM (timezone not stated)
Source modified
Aug 2, 2024, 4:33:11 AM (timezone not stated)
Saved here
15 Nov 2026 02:31:54 UTC
Source terms
ENISA EUVD · source terms and attribution apply

Original source record · Cite this exact observation · Complete original publisher JSON

Source: euvd · ENISA EUVD · source terms and attribution apply. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

EUVD CVSS 3.1 · 6.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:L

nvd · CVE-2024-40644

Published

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user ac…

gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Additional publisher context

NVD analysis and CPE criteria are source context, not proof that a package or your environment is affected. Complete affected data, logical configurations and SSVC are retained in the original JSON.

Source analysis status: Deferred

Weakness classifications: CWE-345

Original publisher date fields

published: 2024-07-18T17:15:04.850

lastModified: 2026-06-17T07:46:13.807

Source published
18 Jul 2024 17:15:04 UTC
Source modified
17 Jun 2026 07:46:13 UTC
Saved here
25 Oct 2026 00:17:22 UTC
Source terms
NIST NVD usage terms; underlying source attribution retained

Original source record · Cite this exact observation · Complete original publisher JSON

Source: nvd · NIST NVD usage terms; underlying source attribution retained. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

CVSS 3.1 · [email protected] · Secondary · 6.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:L

osv · GHSA-mgvv-9p9g-3jv4

Published

gix-path can use a fake program files location

### Summary When looking for Git for Windows so it can run it to report its paths, `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account. ### Details Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories: https://github.com/Byron/gitoxide/blob/6cd8b4665bb7582f744c3244abaef812be39ec35/gix-path/src/env/git.rs#L9-L14 Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.) ### PoC On a 32-bit (x86) Windows 10 system, with or without Git for Windows installed: 1. Create a limited user account in `lusrmgr.msc` or the Settings application. 2. Log in with that account and, using Windows Explorer or the `mkdir` command in PowerShell, create the directories `C:\Program Files (x86)\Git\mingw32\bin`. Although a limited user account cannot create regular files directly in `C:\`, it can create directories including one called `Program Files (x86)`. 3. Place a copy of `C:\Windows\system32\calc.exe` in `C:\Program Files (x86)\Git\mingw32\bin` and rename it from `calc.exe` to `git.exe`. A different test payload may be used if preferred, and the executable need not already be signed or trusted. 4. Log out, and log in as a different user. This user may be an administrator. 5. If `gitoxide` is not installed, install it. If `cargo install gitoxide` is used for the installation, then the version of `gix-path` used in the installation can be observed. 6. The vulnerability is only exploitable if `git` cannot be found in a `PATH` search. So, in PowerShell, run `gcm git` to check if `git` is present in the `PATH`. If so, temporarily remove it. One way to do this is for the current shell only, by running `$env:PATH` to inspect it and by assigning `$env:PATH = '...'` where `...` omits directories that contain `git`. 7. Some commands that can be run outside a repository, and most commands that can be run inside a repository, will run the Calculator or other payload at least once per invocation. Try `gix clone foo` or, inside of a repository, `gix status`, `gix config`, `gix is-changed`, `gix fetch`, `ein t hours`, or `ein t query`. This is not exhaustive; most other `gix` and `ein` commands that access existing repository state or a network resource likewise run the payload. ### Impact Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This vulnerability is comparable to [CVE-2022-24765](https://github.com/git-for-windows/git/security/advisories/GHSA-vw2c-22j4-2fh2), in which an uncontrolled path like `C:\.git\config`, which a limited user can create, could supply configuration used by other users. However, in this case, exploitation is slightly simpler because, rather than using configuration, an executable is directly run.

Source published
18 Jul 2024 15:26:04 UTC
Source modified
10 Sep 2026 03:50:16 UTC
Saved here
24 Oct 2026 13:19:54 UTC
Source terms
GitHub Advisory Database · CC-BY-4.0

Original source record · Cite this exact observation · Complete original publisher JSON

Source: osv · GitHub Advisory Database · CC-BY-4.0. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

CVSS_V3 · CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:L

CVSS_V4 · CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:P/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N

Publisher rating · HIGH

osv · RUSTSEC-2024-0355

Published

gix-path can use a fake program files location

### Summary When looking for Git for Windows so it can run it to report its paths, `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account. ### Details Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking [two hard-coded paths](https://github.com/Byron/gitoxide/blob/6cd8b4665bb7582f744c3244abaef812be39ec35/gix-path/src/env/git.rs#L9-L14) intended to be the 64-bit and 32-bit Program Files directories: ```rust /// Other places to find Git in. #[cfg(windows)] pub(super) static ALTERNATIVE_LOCATIONS: &[&str] = &[ "C:/Program Files/Git/mingw64/bin", "C:/Program Files (x86)/Git/mingw32/bin", ]; ``` Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.) ### PoC On a 32-bit (x86) Windows 10 system, with or without Git for Windows installed: 1. Create a limited user account in `lusrmgr.msc` or the Settings application. 2. Log in with that account and, using Windows Explorer or the `mkdir` command in PowerShell, create the directories `C:\Program Files (x86)\Git\mingw32\bin`. Although a limited user account cannot create regular files directly in `C:\`, it can create directories including one called `Program Files (x86)`. 3. Place a copy of `C:\Windows\system32\calc.exe` in `C:\Program Files (x86)\Git\mingw32\bin` and rename it from `calc.exe` to `git.exe`. A different test payload may be used if preferred, and the executable need not already be signed or trusted. 4. Log out, and log in as a different user. This user may be an administrator. 5. If `gitoxide` is not installed, install it. If `cargo install gitoxide` is used for the installation, then the version of `gix-path` used in the installation can be observed. 6. The vulnerability is only exploitable if `git` cannot be found in a `PATH` search. So, in PowerShell, run `gcm git` to check if `git` is present in the `PATH`. If so, temporarily remove it. One way to do this is for the current shell only, by running `$env:PATH` to inspect it and by assigning `$env:PATH = '...'` where `...` omits directories that contain `git`. 7. Some commands that can be run outside a repository, and most commands that can be run inside a repository, will run the Calculator or other payload at least once per invocation. Try `gix clone foo` or, inside of a repository, `gix status`, `gix config`, `gix is-changed`, `gix fetch`, `ein t hours`, or `ein t query`. This is not exhaustive; most other `gix` and `ein` commands that access existing repository state or a network resource likewise run the payload. ### Impact Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This vulnerability is comparable to [CVE-2022-24765](https://github.com/git-for-windows/git/security/advisories/GHSA-vw2c-22j4-2fh2), in which an uncontrolled path like `C:\.git\config`, which a limited user can create, could supply configuration used by other users. However, in this case, exploitation is slightly simpler because, rather than using configuration, an executable is directly run.

Source published
18 Jul 2024 12:00:00 UTC
Source modified
9 Nov 2026 11:00:03 UTC
Saved here
9 Nov 2026 12:02:17 UTC
Source terms
OSV · upstream source license applies

Original source record · Cite this exact observation · Complete original publisher JSON

Source: osv · OSV · upstream source license applies. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

CVSS_V3 · CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:L

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 16 Nov 14:56 UTC · 274 of 275 readable · 250 fully read · 20 waiting for GitHub's hourly limit · documentation 469/469 current