Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

Layer 7 policy enforcement may not occur in policies with wildcarded port ranges in Cilium

CVSS 3.1 5.8 MEDIUMEUVD CVSS 3.1 5.8 CVSS 3.1 · [email protected] · Secondary 5.8 MEDIUMCVSS 3.1 · [email protected] · Primary 5.8 MEDIUMCVSS_V3 CVSS_V4 Publisher rating MODERATEFixed by github.com/cilium/cilium 1.16.4osv · severity unknownFixed by github.com/cilium/cilium 1.16.4KEV status unknown

cve-program · CVE-2024-52529

Published

Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For users with the following configuration: 1. An allow policy that selects a Layer 3 destination and a port range `AND` 2. A Layer 7 allow policy that selects a specific port within the first policy's range the Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. This issue is patched in PR #35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. Users are advised to upgrade. Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic.

Read the publisher's advisory

euvd · EUVD-2024-3391

Published

Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For users with the following configuration: 1. An allow policy that selects a Layer 3 destination and a port range `AND` 2. A Layer 7 allow policy that selects a specific port within the first policy's range the Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. This issue is patched in PR #35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. Users are advised to upgrade. Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic.

Read the publisher's advisory

nvd · CVE-2024-52529

Published

Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For users with the following configuration: 1. An allow policy that selects a Layer 3 destination and a port range `AND` 2. A Layer 7 allow policy that selects a specific port within the first policy's range the Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. This issue is patched in PR #35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. Users are advised to upgrade. Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic.

Read the publisher's advisory

osv · GHSA-xg58-75qf-9r67

Published

### Impact For users with the following configuration: * An allow policy that selects a [Layer 3 identity](https://docs.cilium.io/en/v1.14/security/policy/language/#layer-3-examples) and a [port range](https://docs.cilium.io/en/stable/security/policy/language/#example-port-ranges) **AND** * A [Layer 7 allow policy](https://docs.cilium.io/en/latest/security/policy/language/#layer-7-examples) that selects a specific port within the first policy's range then Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. For reference, an example of a pair of policies that would trigger this issue is: ``` apiVersion: "cilium.io/v2" kind: CiliumNetworkPolicy metadata: name: "layer-3-and-4" spec: endpointSelector: matchLabels: app: service ingress: - fromCIDR: - 192.168.60.0/24 toPorts: - ports: - port: "80" endPort: 444 protocol: TCP ``` and ``` apiVersion: "cilium.io/v2" kind: CiliumNetworkPolicy metadata: name: "layer-4-and-7" spec: endpointSelector: matchLabels: app: service ingress: toPorts: - ports: - port: "80" protocol: TCP rules: http: - method: "GET" path: "/public" ``` In the above example, requests would be permitted to all HTTP paths on matching endpoints, rather than just `GET` requests to the `/public` path as intended by the `layer-4-and-7` policy. In patched versions of Cilium, the `layer-4-and-7` rule would take precedence over the `layer-3-and-4` rule. ### Patches This issue is patched in https://github.com/cilium/cilium/pull/35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. ### Workarounds Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic. ### Acknowledgements The Cilium community has worked together with members of Isovalent to prepare these mitigations. Special thanks to @jrajahalme for resolving this issue. ### For more information If you have any questions or comments about this advisory, please reach out on [Slack](https://docs.cilium.io/en/latest/community/community/#slack). If you think you have found a vulnerability affecting Cilium, we strongly encourage you to report it to our security mailing list at [[email protected]](mailto:[email protected]). This is a private mailing list for the Cilium security team, and your report will be treated as top priority.

Read the publisher's advisory

osv · GO-2024-3290

Published

Cilium's Layer 7 policy enforcement may not occur in policies with wildcarded port ranges in github.com/cilium/cilium

Read the publisher's advisory

Affected versions, risk and source history

cve-program · CVE-2024-52529

Published

cilium

Vendor product

Publisher's version information

Shown as published. These rules are not interpreted as NuGet package version ranges.

{
                    "vendor": "cilium",
                    "product": "cilium",
                    "versions": [
                        {
                            "version": ">= 1.16.0, < 1.16.4",
                            "status": "affected"
                        }
                    ]
                }

Original source record · Cite this exact observation · Complete original publisher JSON

euvd · EUVD-2024-3391

Published

EUVD source date text has no stated timezone and is retained without inventing a UTC instant. Related bulletin membership is not an alias, common cause or applicability claim. A missing vector with a zero score is treated as unrated. Complete vendor/product and underlying source evidence remains in the original JSON.

Original publisher date fields

datePublished: Nov 25, 2024, 6:49:15 PM

dateUpdated: Nov 26, 2024, 2:28:59 PM

1 related source bulletins · separate from aliases

openSUSE-SU-2024:14567-1: govulncheck-vulndb-0.0.20241209T183251-1.1 on GA media

CVE-2024-10220 · CVE-2024-36620 · CVE-2024-36621 · CVE-2024-36623 · CVE-2024-37820 · CVE-2024-43784 · CVE-2024-45719 · CVE-2024-50948 · CVE-2024-52003 · CVE-2024-52529 · CVE-2024-52801 · CVE-2024-53259 · CVE-2024-53264 · CVE-2024-53858 · CVE-2024-53862 · CVE-2024-54131 · CVE-2024-54132 · CVE-2024-6156 · CVE-2024-6219 · CVE-2024-6538 · CVE-2024-8676

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

nvd · CVE-2024-52529

Published

NVD analysis and CPE criteria are source context, not proof that a package or your environment is affected. Complete affected data, logical configurations and SSVC are retained in the original JSON.

Source analysis status: Analyzed

Weakness classifications: CWE-755

Original publisher date fields

published: 2024-11-25T19:15:11.373

lastModified: 2026-06-17T08:07:23.653

1 source CPE criteria · context only
  • cpe:2.3:a:cilium:cilium:*:*:*:*:*:*:*:*

The original JSON retains the logical configuration operators, exclusions and version bounds.

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

osv · GHSA-xg58-75qf-9r67

Published

github.com/cilium/cilium

Go

SEMVER · introduced 1.16.0 → fixed 1.16.4

Original source record · Cite this exact observation · Complete original publisher JSON

osv · GO-2024-3290

Published

github.com/cilium/cilium

Go

SEMVER · introduced 1.16.0 → fixed 1.16.4

Original source record · Cite this exact observation · Complete original publisher JSON

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 16 Nov 13:53 UTC · 274 of 275 readable · 250 fully read · 20 waiting for GitHub's hourly limit · documentation 469/469 current