Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

rustls 0.23.44 and 0.23.45 ECH Rejection Application Data Disclosure

CVSS 4.0 4.6 MEDIUMCVSS 3.1 2.3 LOWEUVD CVSS 4.0 4.6 CVSS 4.0 · [email protected] · Secondary 4.6 MEDIUMCVSS 3.1 · [email protected] · Secondary 2.3 LOWCVSS_V3 Publisher rating LOWFixed by rustls 0.23.46Fixed by rustls 0.24.0-dev.2CVSS_V3 Fixed by rustls 0.23.46KEV status unknown

cve-program · CVE-2026-123612

Published

rustls 0.23.44 and 0.23.45 contain an information disclosure vulnerability that sends application data buffered before the handshake completes to the client-facing server when Encrypted Client Hello is rejected. Because start_traffic() queues plaintext from ClientConnection::writer() before sending the ech_required alert, the authenticated public_name server receives data intended for the inner server.

Read the publisher's advisory

euvd · EUVD-2026-119371

Published

rustls 0.23.44 and 0.23.45 contain an information disclosure vulnerability that sends application data buffered before the handshake completes to the client-facing server when Encrypted Client Hello is rejected. Because start_traffic() queues plaintext from ClientConnection::writer() before sending the ech_required alert, the authenticated public_name server receives data intended for the inner server.

Read the publisher's advisory

nvd · CVE-2026-123612

Published

rustls 0.23.44 and 0.23.45 contain an information disclosure vulnerability that sends application data buffered before the handshake completes to the client-facing server when Encrypted Client Hello is rejected. Because start_traffic() queues plaintext from ClientConnection::writer() before sending the ech_required alert, the authenticated public_name server receives data intended for the inner server.

Read the publisher's advisory

osv · GHSA-vp88-798v-h67f

Published

In rustls 0.23.44 and 0.23.45, application data that a client buffers before the handshake completes is sent to the server even when the server rejects Encrypted Client Hello (ECH). When the server rejects ECH, the client completes the handshake with the outer ClientHello and authenticates the server against the ECH config's `public_name`. At the end of the handshake, `start_traffic()` encrypts and queues any plaintext buffered by `ClientConnection::writer()`. It does this *before* checking for `EchStatus::Rejected` and queueing the `ech_required` alert. The application then receives `Error::PeerIncompatible(ServerRejectedEncryptedClientHello)`, as expected. However, the client is still expected to call `write_tls()` to send the fatal alert, and that call also sends the encrypted application data. The server decrypts the data and only then receives the alert. The ordering bug is older than 0.23.44. Before 0.23.44, the client checked the server certificate against the inner server name rather than `public_name`, so a correctly configured server failed certificate verification first and no data was sent. 0.23.44 fixed that check, which makes the ordinary rejection path reachable. # Impact Plaintext meant for the inner server, the one named in the encrypted ClientHello, goes to the client-facing server identified by `public_name`. That server is properly authenticated, so this is not an attack by an unauthenticated party. However this violates [RFC 9849](https://www.rfc-editor.org/info/rfc9849), which says the following: - Section 6.1.6: if the handshake and authentication succeed after ECH rejection, the client "MUST ... abort the connection with an "ech_required" alert **before sending any application data to the server.**" - Section 6.1.7: the certificate is checked only against `public_name`, and the connection "MUST NOT" be reported as successful to the application. rustls does report failure correctly. The problem is only that data is sent before the alert. This affects only clients that meet all of these conditions: - They use `EchMode::Enable`. GREASE ECH is not affected. - They write application data before the handshake completes. - They connect to a server that rejects their ECH config, for example because the config is stale. This is the same case where the server returns retry configs. The usual client response to rejection is to retry with the server's retry configs. In that case, the data has already gone to the outer server.

Read the publisher's advisory

osv · RUSTSEC-2026-0347

Published

When a server rejects Encrypted Client Hello (ECH), the client completes the handshake using the outer ClientHello and authenticates the server against the ECH config's `public_name`. At the end of that handshake, rustls encrypted and queued any application data buffered via `ClientConnection::writer()` *before* queueing the `ech_required` alert. The application correctly receives `Error::PeerIncompatible(ServerRejectedEncryptedClientHello)`, but the next `write_tls()` call (needed to send the alert) also sends the buffered application data. Plaintext meant for the inner server therefore goes to the client-facing server named by `public_name`. That server is authenticated, so this is not exploitable by an unauthenticated party, but it violates RFC 9849 section 6.1.6, which requires the client to abort with `ech_required` "before sending any application data to the server". This affects only clients that: - use `EchMode::Enable` (GREASE ECH is not affected), - write application data before the handshake completes, and - connect to a server that rejects their ECH config (for example, because it is stale). The underlying ordering bug is older, but before 0.23.44 the client checked the server certificate against the inner server name rather than `public_name`, so certificate verification failed first and no data was sent.

Read the publisher's advisory

Affected versions, risk and source history

cve-program · CVE-2026-123612

Published

rustls

Vendor product

Publisher's version information

Shown as published. These rules are not interpreted as NuGet package version ranges.

{
                    "vendor": "rustls",
                    "product": "rustls",
                    "defaultStatus": "unaffected",
                    "packageURL": "pkg:cargo/rustls",
                    "versions": [
                        {
                            "version": "0.23.44",
                            "status": "affected",
                            "versionType": "semver",
                            "lessThan": "0.23.46"
                        },
                        {
                            "version": "0.23.46",
                            "status": "unaffected",
                            "versionType": "semver"
                        }
                    ]
                }

Original source record · Cite this exact observation · Complete original publisher JSON

euvd · EUVD-2026-119371

Published

EUVD source date text has no stated timezone and is retained without inventing a UTC instant. Related bulletin membership is not an alias, common cause or applicability claim. A missing vector with a zero score is treated as unrated. Complete vendor/product and underlying source evidence remains in the original JSON.

Original publisher date fields

datePublished: Nov 8, 2026, 1:38:36 AM

dateUpdated: Nov 12, 2026, 1:40:04 PM

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

nvd · CVE-2026-123612

Published

NVD analysis and CPE criteria are source context, not proof that a package or your environment is affected. Complete affected data, logical configurations and SSVC are retained in the original JSON.

Source analysis status: Awaiting Analysis

Weakness classifications: CWE-696

Original publisher date fields

published: 2026-11-08T02:16:56.597

lastModified: 2026-11-12T21:30:23.870

No normalized affected-package data is projected for this source revision. The original publisher record may contain additional product and version evidence; this does not establish that a package is unaffected.

Original source record · Cite this exact observation · Complete original publisher JSON

osv · GHSA-vp88-798v-h67f

Published

rustls

crates.io

SEMVER · introduced 0.23.44 → fixed 0.23.46

rustls

crates.io

SEMVER · introduced 0.24.0-dev.1 → fixed 0.24.0-dev.2

Original source record · Cite this exact observation · Complete original publisher JSON

osv · RUSTSEC-2026-0347

Published

rustls

crates.io

SEMVER · introduced 0.23.44 → fixed 0.23.46

Original source record · Cite this exact observation · Complete original publisher JSON

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 17 Nov 00:39 UTC · 274 of 275 readable · 250 fully read · 20 waiting for GitHub's hourly limit · documentation 469/469 current