Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

tar-rs: unpack_in can chmod arbitrary directories by following symlinks

CVSS 4.0 5.1 MEDIUMEUVD CVSS 4.0 5.1 CVSS 4.0 · [email protected] · Secondary 5.1 MEDIUMCVSS 3.1 · [email protected] · Primary 6.5 MEDIUMCVSS_V3 CVSS_V4 Publisher rating MODERATEFixed by tar 0.4.45CVSS_V4 Fixed by tar 0.4.45KEV status unknown

cve-program · CVE-2026-33056

Published

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Because fs::metadata() follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45.

Read the publisher's advisory

euvd · EUVD-2026-13616

Published

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Because fs::metadata() follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45.

Read the publisher's advisory

nvd · CVE-2026-33056

Published

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Because fs::metadata() follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45.

Read the publisher's advisory

osv · GHSA-j4xf-2g29-59ph

Published

## Summary When unpacking a tar archive, the `tar` crate's `unpack_dir` function uses `fs::metadata()` to check whether a path that already exists is a directory. Because `fs::metadata()` follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply `chmod` to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. ## Reproducer A malicious tarball contains two entries: (1) a symlink `foo` pointing to an arbitrary external directory, and (2) a directory entry `foo/.` (or just `foo`). When unpacked, `create_dir("foo")` fails with `EEXIST` because the symlink is already on disk. The `fs::metadata()` check then follows the symlink, sees a directory at the target, and allows processing to continue. The directory entry's mode bits are then applied via `chmod`, which also follows the symlink — modifying the permissions of the external target directory. ## Fix The fix is very simple, we now use `fs::symlink_metadata()` in `unpack_dir`, so symlinks are detected and rejected rather than followed. ## Credit This issue was reported by @xokdvium - thank you!

Read the publisher's advisory

osv · RUSTSEC-2026-0067

Published

In versions 0.4.44 and below of tar-rs, when unpacking a tar archive, the tar crate's `unpack_dir` function uses [`fs::metadata()`][fs-metadata] to check whether a path that already exists is a directory. Because `fs::metadata()` follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45. [fs-metadata]: https://doc.rust-lang.org/std/fs/fn.metadata.html

Read the publisher's advisory

Affected versions, risk and source history

Exploitation and risk

Source status

CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.

Which CVEs have scores here?

This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.

No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.

Risk history

Compare earlier KEV listings and EPSS scores. Advisory wording and affected versions have a separate history.

When does an EPSS score appear as a change?

A prediction change is reported when EPSS rises from below 10% to 10% or higher. Every daily score change from the last 30 days stays in this history. Before that, it keeps KEV changes and moves between EPSS bands (0.1%, 1%, 5%, 10%, 20%, 50% and 90%).

Advisory history

14 saved versions

See how the publisher's advisory changed over time. Each link opens the version saved at that time. The publisher's update date can differ from the date shown here.

How advisory history works

Each link identifies one complete publisher record. History can include advisories that previously shared an identifier; an identifier removed by a publisher no longer establishes a current relationship. A historical link shows only that record and earlier saved versions. Failed checks and unchanged reads do not create new versions.

15 Nov 2026 09:37:20 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

13 Nov 2026 09:05:15 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

11 Nov 2026 08:35:08 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

9 Nov 2026 08:08:37 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

7 Nov 2026 07:32:42 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

5 Nov 2026 07:01:52 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

3 Nov 2026 06:05:31 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

1 Nov 2026 05:11:47 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

30 Oct 2026 04:56:00 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

28 Oct 2026 03:57:26 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

euvd · EUVD-2026-13616 · Published

25 Oct 2026 08:17:18 UTC

tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Becaus…

nvd · CVE-2026-33056 · Published

24 Oct 2026 13:19:54 UTC

tar-rs `unpack_in` can chmod arbitrary directories by following symlinks

osv · GHSA-j4xf-2g29-59ph · Published

24 Oct 2026 13:19:54 UTC

`unpack_in` can chmod arbitrary directories by following symlinks

osv · RUSTSEC-2026-0067 · Published

23 Oct 2026 15:48:27 UTC

tar-rs: unpack_in can chmod arbitrary directories by following symlinks

cve-program · CVE-2026-33056 · Published

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 16 Nov 03:41 UTC · 274 of 275 readable · 259 fully read · 11 waiting for GitHub's hourly limit · documentation 447/469 current