Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

net: usb: ipheth: fix carrier_work UAF on disconnect

cve-program · severity unknownCVSS unknownCheck source for fixed versionsKEV status unknown

cve-program · CVE-2026-74677

Published

In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai).

Read the publisher's advisory

Affected versions, risk and source history

Exploitation and risk

Source status

CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.

Which CVEs have scores here?

This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.

No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.

cve-program · CVE-2026-74677

Published

net: usb: ipheth: fix carrier_work UAF on disconnect

In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai).

Source published
22 Aug 2026 15:32:46 UTC
Source modified
22 Aug 2026 15:32:46 UTC
Saved here
23 Oct 2026 15:48:27 UTC
Source terms
CVE Program Terms of Use

Original source record · Cite this exact observation · Complete original publisher JSON

Source: cve-program · CVE Program Terms of Use. The publisher's wording is preserved. ChangeIntel groups the information and labels changes. The JSON record includes additional source fields.

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 21 Nov 16:40 UTC · 274 of 275 readable · 270 fully read · documentation 469/469 current