Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

Non-interactive Tailscale SSH sessions on FreeBSD may use the effective group ID of the tailscaled process

CVSS 3.1 5.7 MEDIUMEUVD CVSS 3.1 5.7 CVSS 3.1 · [email protected] · Secondary 5.7 MEDIUMCVSS 3.1 · [email protected] · Primary 8.0 HIGHCVSS_V3 Publisher rating MODERATEFixed by tailscale.com 1.38.2osv · severity unknownFixed by tailscale.com 1.38.2KEV status unknown

cve-program · CVE-2023-28436

Published

Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules. Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used. Affected users should upgrade to version 1.38.2 to remediate the issue.

Read the publisher's advisory

euvd · EUVD-2023-1110

Published

Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules. Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used. Affected users should upgrade to version 1.38.2 to remediate the issue.

Read the publisher's advisory

nvd · CVE-2023-28436

Published

Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules. Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used. Affected users should upgrade to version 1.38.2 to remediate the issue.

Read the publisher's advisory

osv · GHSA-vfgq-g5x8-g595

Published

A vulnerability identified in the implementation of Tailscale SSH in FreeBSD allowed commands to be run with a higher privilege group ID than that specified by Tailscale SSH access rules. **Affected platforms**: FreeBSD **Patched Tailscale client versions**: v1.38.2 or later ### What happened? A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules. ### Who is affected? 9 tailnets with 22 FreeBSD nodes running Tailscale SSH since Tailscale v1.34 (released on 2022-12-04) may have had Tailscale SSH sessions with a higher privilege group ID than that specified in Tailscale SSH access rules. We have notified the affected organizations where we have [security contacts](https://tailscale.com/kb/1224/contact-preferences/#setting-the-security-issues-email). ### What is the impact? Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: * The destination node was a FreeBSD device with Tailscale SSH enabled; * Tailscale SSH access rules permitted access for non-root users; and * A non-interactive SSH session was used. ### What do I need to do? If you are running Tailscale on FreeBSD, upgrade to v1.38.2 or later to remediate the issue. Admins of a tailnet can view [FreeBSD nodes with unpatched versions](https://login.tailscale.com/admin/machines?q=version%3A%3C1.38.2+freebsd) in the admin console. To update the local ports tree in advance of what's available upstream, you can: 1. `cd /usr/ports/security/tailscale` 2. edit the Makefile to set `PORTVERSION` to `1.38.2` 3. `make makesum` 4. `make install` Tailscale SSH on other platforms is not affected. ### Credits We would like to thank [Ryan Belgrave](https://www.linkedin.com/in/rbelgrave/) for reporting this issue. ### References * [TS-2023-003](https://tailscale.com/security-bulletins/#ts-2023-003)

Read the publisher's advisory

osv · GO-2023-1671

Published

Non-interactive Tailscale SSH sessions on FreeBSD may use the effective group ID of the tailscaled process in tailscale.com

Read the publisher's advisory

Affected versions, risk and source history

Related advisories and sources

Publishers link these advisories through the identifiers shown below. A shared identifier or date alone does not tell you whether your software is affected or whether the advisories describe the same cause.

CVE-2023-28436 · CVE overview and exploitation status

EUVD-2023-1110

GHSA-vfgq-g5x8-g595

GO-2023-1671

cve-program · CVE-2023-28436

euvd · EUVD-2023-1110

nvd · CVE-2023-28436

osv · GHSA-vfgq-g5x8-g595

osv · GO-2023-1671

Related changes

Linked by CVE identifier

No related changes are available here.

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 19 Nov 04:49 UTC · 273 of 275 readable · 269 fully read · documentation 469/469 current