Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.
Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used.
Affected users should upgrade to version 1.38.2 to remediate the issue.
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.
Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used.
Affected users should upgrade to version 1.38.2 to remediate the issue.
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.
Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used.
Affected users should upgrade to version 1.38.2 to remediate the issue.
A vulnerability identified in the implementation of Tailscale SSH in FreeBSD allowed commands to be run with a higher privilege group ID than that specified by Tailscale SSH access rules.
**Affected platforms**: FreeBSD
**Patched Tailscale client versions**: v1.38.2 or later
### What happened?
A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules.
### Who is affected?
9 tailnets with 22 FreeBSD nodes running Tailscale SSH since Tailscale v1.34 (released on 2022-12-04) may have had Tailscale SSH sessions with a higher privilege group ID than that specified in Tailscale SSH access rules.
We have notified the affected organizations where we have [security contacts](https://tailscale.com/kb/1224/contact-preferences/#setting-the-security-issues-email).
### What is the impact?
Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria:
* The destination node was a FreeBSD device with Tailscale SSH enabled;
* Tailscale SSH access rules permitted access for non-root users; and
* A non-interactive SSH session was used.
### What do I need to do?
If you are running Tailscale on FreeBSD, upgrade to v1.38.2 or later to remediate the issue. Admins of a tailnet can view [FreeBSD nodes with unpatched versions](https://login.tailscale.com/admin/machines?q=version%3A%3C1.38.2+freebsd) in the admin console.
To update the local ports tree in advance of what's available upstream, you can:
1. `cd /usr/ports/security/tailscale`
2. edit the Makefile to set `PORTVERSION` to `1.38.2`
3. `make makesum`
4. `make install`
Tailscale SSH on other platforms is not affected.
### Credits
We would like to thank [Ryan Belgrave](https://www.linkedin.com/in/rbelgrave/) for reporting this issue.
### References
* [TS-2023-003](https://tailscale.com/security-bulletins/#ts-2023-003)
CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.
Which CVEs have scores here?
This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.
No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.
Risk history
Compare earlier KEV listings and EPSS scores. Advisory wording and affected versions have a separate history.
When does an EPSS score appear as a change?
A prediction change is reported when EPSS rises from below 10% to 10% or higher. Every daily score change from the last 30 days stays in this history. Before that, it keeps KEV changes and moves between EPSS bands (0.1%, 1%, 5%, 10%, 20%, 50% and 90%).
Advisory history
16 saved versions
See how the publisher's advisory changed over time. Each link opens the version saved at that time. The publisher's update date can differ from the date shown here.
How advisory history works
Each link identifies one complete publisher record. History can include advisories that previously shared an identifier; an identifier removed by a publisher no longer establishes a current relationship. A historical link shows only that record and earlier saved versions. Failed checks and unchanged reads do not create new versions.
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …
Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run …