Public mode

No access to your tenant or devices. Every item links to its source. What this means

Sources need attention Customize Public modeDiscuss ChangeIntel on Discord

pgEdge Control Plane generates pg_hba.conf with trust authentication for local and loopback connections

CVSS 3.1 7.8 HIGHEUVD CVSS 3.1 7.8 CVSS 3.1 · [email protected] · Secondary 7.8 HIGHCVSS_V3 Publisher rating HIGHFixed by github.com/pgEdge/control-plane 0.11.0KEV status unknown

cve-program · CVE-2026-125323

Published

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback connections. Because PostgreSQL evaluates the file from top to bottom, those entries also preempted operator-supplied rules in the pg_hba_conf field. Under the systemd orchestrator, any unprivileged operating-system account on a database host could authenticate as any PostgreSQL role, including the superuser, without credentials and obtain full control of the host's databases. Under Docker Swarm, reaching the container-local socket or loopback interface required code execution inside the database container. Publishing the PostgreSQL port to the host did not expose these trust rules because host connections did not appear to originate from 127.0.0.1 or ::1. This issue is fixed in version 0.11.0.

Read the publisher's advisory

euvd · EUVD-2026-121705

Published

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback connections. Because PostgreSQL evaluates the file from top to bottom, those entries also preempted operator-supplied rules in the pg_hba_conf field. Under the systemd orchestrator, any unprivileged operating-system account on a database host could authenticate as any PostgreSQL role, including the superuser, without credentials and obtain full control of the host's databases. Under Docker Swarm, reaching the container-local socket or loopback interface required code execution inside the database container. Publishing the PostgreSQL port to the host did not expose these trust rules because host connections did not appear to originate from 127.0.0.1 or ::1. This issue is fixed in version 0.11.0.

Read the publisher's advisory

nvd · CVE-2026-125323

Published

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback connections. Because PostgreSQL evaluates the file from top to bottom, those entries also preempted operator-supplied rules in the pg_hba_conf field. Under the systemd orchestrator, any unprivileged operating-system account on a database host could authenticate as any PostgreSQL role, including the superuser, without credentials and obtain full control of the host's databases. Under Docker Swarm, reaching the container-local socket or loopback interface required code execution inside the database container. Publishing the PostgreSQL port to the host did not expose these trust rules because host connections did not appear to originate from 127.0.0.1 or ::1. This issue is fixed in version 0.11.0.

Read the publisher's advisory

osv · GHSA-vq9p-w6wv-cr25

Published

### Summary Every `pg_hba.conf` generated by the pgEdge Control Plane begins with a hard-coded block of `trust` entries covering Unix-socket and loopback connections. Any operating-system account that can reach the Postgres socket or the loopback interface on a database host can authenticate as any Postgres role, including the superuser, without presenting a credential. ### Details The generated file opens with the following six entries: ``` local all all trust host all all 127.0.0.1/32 trust host all all ::1/128 trust local replication all trust host replication all 127.0.0.1/32 trust host replication all ::1/128 trust ``` Postgres evaluates `pg_hba.conf` top-down and stops at the first matching rule. Because these entries are emitted at the top of the file, they also pre-empt every rule below them — including entries supplied by an operator through the `pg_hba_conf` field of a database node specification, which are appended lower in the file and are therefore never reached for local or loopback connections. Both supported orchestrators emit these entries, but exposure differs by deployment model: * **systemd** — the database runs on a shared multi-user host. Any local account on that host can connect as the Postgres superuser. This is the higher-severity case and the one the CVSS score below reflects. * **Docker Swarm** — the Unix socket and the loopback interface belong to the Postgres container, so reaching these entries requires code execution inside that container. Publishing the Postgres port to the host does not change this: such connections are not seen by Postgres as originating from `127.0.0.1` or `::1`, so they do not match the entries above. The practical exposure is correspondingly narrower. An operator who verifies their own deployment can confirm the issue by inspecting the generated `pg_hba.conf` on a database node for the entries above. ### Impact An unprivileged local operating-system account on an affected database host obtains full control of every Postgres database on that host: read of all data, modification or destruction of all data, and any action available to a Postgres superuser. Under the systemd orchestrator this converts any local account into a database superuser with no additional prerequisites. ### Affected versions pgEdge Control Plane v0.1.0 through v0.10.1, inclusive. ### Patches Fixed in **v0.11.0**. Generated `pg_hba.conf` files no longer contain `trust` entries, and operator-supplied local authentication rules take effect. Upgrading to v0.11.0 or later is the recommended and, on v0.9.0 and later, the only complete remedy. ### Workarounds The available mitigation differs by version, and no mitigation is complete on current releases. **v0.1.0 – v0.8.1.** An operator could take the authentication files out of Patroni's control entirely: copy the generated `pg_hba.conf` and `pg_ident.conf`, edit the copies, and point the `hba_file` and `ident_file` settings at them through node-level `postgresql_conf`. This is effective but must be repeated per instance, including for every node added afterwards. **v0.9.0 – v0.10.1.** The above no longer applies. API validation rejects the `hba_file` and `ident_file` settings, and entries supplied through the `pg_hba_conf` specification array are appended below the hard-coded block rather than overriding it, so they do not take effect for local or loopback connections. The only partial mitigation available is to restrict the Unix socket: set `unix_socket_permissions` to `0700`, or to `0770` with the intended accounts placed in the `postgres` group. **This closes the socket path only. No supported configuration closes the loopback path on these versions.** Operators on v0.9.0 – v0.10.1 should upgrade to v0.11.0.

Read the publisher's advisory

Affected versions, risk and source history

Exploitation and risk

Source status

CISA KEV lists vulnerabilities known to be exploited. FIRST EPSS estimates the likelihood of exploitation in the next 30 days. An unavailable score does not mean zero risk.

Which CVEs have scores here?

This view includes predictions for CVE identifiers explicitly listed in public NuGet advisories. Microsoft release pages have their own prediction coverage. Check source status for the scope and latest checks.

No exploitation or prediction data is available here for these CVEs. This does not mean they are safe or unlikely to be exploited.

Risk history

Compare earlier KEV listings and EPSS scores. Advisory wording and affected versions have a separate history.

When does an EPSS score appear as a change?

A prediction change is reported when EPSS rises from below 10% to 10% or higher. Every daily score change from the last 30 days stays in this history. Before that, it keeps KEV changes and moves between EPSS bands (0.1%, 1%, 5%, 10%, 20%, 50% and 90%).

Advisory history

7 saved versions

See how the publisher's advisory changed over time. Each link opens the version saved at that time. The publisher's update date can differ from the date shown here.

How advisory history works

Each link identifies one complete publisher record. History can include advisories that previously shared an identifier; an identifier removed by a publisher no longer establishes a current relationship. A historical link shows only that record and earlier saved versions. Failed checks and unchanged reads do not create new versions.

14 Nov 2026 21:28:02 UTC

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback co…

euvd · EUVD-2026-121705 · Published

14 Nov 2026 21:27:30 UTC

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback co…

nvd · CVE-2026-125323 · Published

12 Nov 2026 21:17:01 UTC

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback co…

euvd · EUVD-2026-121705 · Published

12 Nov 2026 21:16:36 UTC

pgEdge Control Plane is a distributed application for managing and orchestrating Postgres databases across multiple hosts. From 0.1.0 to 0.10.1, generated pg_hba.conf files began with hard-coded trust entries for Unix-socket and loopback co…

nvd · CVE-2026-125323 · Published

12 Nov 2026 21:16:26 UTC

pgEdge Control Plane generates pg_hba.conf with trust authentication for local and loopback connections

osv · GHSA-vq9p-w6wv-cr25 · Published

12 Nov 2026 20:16:18 UTC

pgEdge Control Plane generates pg_hba.conf with trust authentication for local and loopback connections

cve-program · CVE-2026-125323 · Published

10 Nov 2026 19:21:22 UTC

pgEdge Control Plane generates pg_hba.conf with trust authentication for local and loopback connections

cve-program · CVE-2026-125323 · Published

ChangeIntel

An IT change radar: releases, security, known issues, retirements, documentation changes, and service status from public sources. Every item links to supporting evidence; dates and statuses can change after they are read.

Sources read 16 Nov 10:01 UTC · 274 of 275 readable · 252 fully read · 18 waiting for GitHub's hourly limit · documentation 469/469 current